High voltage Lithium Primary Soft Battery CP603742 Non Rechargeable For Intelligent Logistics
Nominal Capacity | 2400mAh |
Nominal Voltage | 3.0 V |
Maximum Continuous Current | 1000mA |
At +25°C,battery discharged at continuous current 5mA until voltage reaches cut-off voltage 2.0V. The capacity can vary at different temperature, discharge current or cut-off voltage. | |
Maximum Pulse Discharge Current | 1200mA |
At +25°C, 2.0V cut-off, battery discharged for minimum 50% of rated capacity with max pulse for 3 seconds after 27 seconds break. The discharged capacity may vary according to the pulse characteristics, the temperature, and the cell’s previous history.Fitting the cell with a capacitor may be recommended in severe conditions. Consult HCB. | |
Storage Condition (recommended) | Temperature ≤ 30℃ Humidity ≤ 75%RH |
Operating Temperature | -40℃ to +70℃ |
Battery Width( Max ) | 38.0mm |
Battery Height( Max ) | 43.0mm |
Battery Thickness( Max ) | 6.2mm |
Typical Weight | 16.5g |
Li Metal Content | 0.84g |
1. Lithium Primary Li-MnO2 CP603742 Soft Battery Benefits
● High Voltage : Nominal Voltage up to 3.0V
● High Energy Density : Energy Density up to 830Wh/L
● Wide Operating Temperature Range (-40℃~+70℃)
● Low Self-discharge Rate : Less than 2% per year of storage at +20°C
2. Main Application Fields
● Intelligent Logistics
● Cold Chain
● Smart Gas Meter
● RFID and Tracking System
● Wireless Transmitting
● Smart Home Devices
● Military Devices
● Intelligent Agriculture - Breeding Care & Animal Tracking
3. Application Case Presentation For Intelligent Logistics ( Cold Chain )
4. Key Characteristics
● Optimized Battery Structure,Full Discharge Capacity
● Super Long Endurance
● No Passivation
● GB 8897.4-2008,IEC 60086.4:2014 and RoHS
● Easy to Recover
5. Warning
● Do not charge CP603742 soft battery
● Do Not Short Circuit
● Do Not Recharge Lithuim Primary Battery
● Do Not Puncture
● Do Not Crush
● Do Not Dismantle
● Do Not Incinerate
● Do Not Mix New and Used Batteries
● Do Not Heat Above 100°C
6. FAQ
The environment should be dry enough.
We need to stop using the battery when the abnormal heat release or leakage occurs.
Could you supply different sizes of batteries according to my product?
Yes, you can send your requirements about size or capacity to us.