3.6V Lithium - Thionyl Chloride C-size Bobbin Cell ER26500 Non Rechargeable For Electronic Toll Collection ,Smart Metering etc.
Open circuit voltage (at 23±2°C) | 3.65V | Nominal Capacity(mAh) | 8500 |
Max Size(mm) | Φ26.2×50.0 | Storage (recommended) | ≤30°C ≤75%RH |
Weight(g) | 53 | Max Continuous Current(mA) | 150 |
Nominal Voltage(V) | 3.6 | Maximum pulse discharge current(mA) | 300 |
Operating temperature range | -55°C~+85°C | Operation above ambient temperature may lead to reduced capacity and lower voltage readings at the beginning of pulses. Consult HCB |
1. ER26500 Benefits
The rated voltage of the single battery is 3.6V, high temperature load voltage from 3.4 V to 3.6 V
Normal operating temperature from -55℃ to +85℃ (Operation above ambient temperature may lead to reduced
capacity and lower voltage readings at the beginning of pulses. Consult HCB)
2. Main Applications
Be able to meet ETC system power requirements
Well pressure meters in high temperature, float meter, logging while drilling (LWD), measure while drilling (MWD), etc.
Tire Pressure Monitoring System (TPMS), cylinder inspection device
High temperature detector
3. FAQS and General Safety Instructions
When the abnormal heat release or leakage occurs, the battery is not able to be continued to use.
The manual should be read before the battery is used.
You need to follow the signs + and - on the batteries and make sure not to reverse. If batteries are wrongly used, they will be hot very fast and can lead the gas and other toxic materials leakage.
The batteries are able to be deformed or drilled into or damaged because the toxic materials or gas leakage may lead a big rupture.
Battery disposal method should be in accordance with local regulations.