Plastic Board Salt Spray Corrosion Testing Chamber With Multiple Safety Protection Device
Product introduction:
P.V.C Rigid Plastic Board Salt Spray Corrosion Testing Chamber is is designed for surface treatment of corrosion-resistant capacity test for various materials,including paint, electroplating, organic and inorganic film, antirust oil,chemicaltreatment, and then achieves a long period of resistance to corrosion products.
Ferrous and non-ferrous metals are attacked continuously by humidity, acids, solutions, gases etc. It is therefore vitally important to choose the correct surface protection. There are many materials and qualities on the market and their properties must be properly assessed. Materials intended to prevent corrosion must be tested if failures are to be avoided. Furthermore the comparative quality control during production is of increasing importance. The best known processes employ spray vapour tests using various salt solutions as well as condensation water climates.
P.V.C Rigid Plastic Board Salt Spray Corrosion Testing Chamber
Design standard:
CNS:3627,3385,4159,7669,8886JIS:D0201,H8502,H8610,K5400,Z2371;
ISO: 3768,3769,3770;
ASTM: 8117,B268.
Specifications:
Model | LY-609-60 | LY-609-90 | LY-609-120 | LY-609-200 |
Design Standards | GB/T 10587-2006,GB/T 10125-1997,JIS-D0201,H8502,H8610,K5400,Z2371 | |||
Test chamber capacity (L) | 108L | 270L | 600L | 1440L |
Temperature | Test chamber | NSS.ACSS 35°C±1 C/CASS 50°C±1°C | ||
Air cylinder | NSS.ACSS 47°C±1° C/CASS 63°C±1°C | |||
Test chamber size LxWxD(cm) | 60*45*40 | 90*60*50 | 120*100*50
| 200*120*60 |
Max volum of test liquid (L) | 15 | 25 | 40 | 40 |
Volume LxWxD(cm) | 107*60*118 | 141*88*128 | 190*130*140 | 270*1 50*150 |
Power | AC220V,10A | AC220V,15A | AC220V,30A | AC220V, 30A |
Spray quantity | 1.0~2.0ml/80cm2/h | |||
PH | 6.5~7.2 3.0~3.2 |