Digital Gold Purity Test Meter And Metal Density Meter Precision 0.005 CE Certificate

Suitable for : Jewelry industry , bank , Pawn industry , Gold and Precious Metal research lab .

Principle: According to the buoyancy method of Archimedean principle , can show gold karat density and purity% rapidly and accurately .

Functions :

1. Density Tester for Precious metal need Only two weighing steps , the purity% of precious metals and gold karat can be shows rapidly and accurately .

2. No stains and scratches left on gold after testing , it doesn't need to use the sulfuric acid solution to test the standard samples .

3. Density Tester for Precious metal With the special software design , it can directly and circularly show the gold karat (including gold-copper-silver , gold-copper , gold -silver), gold purity% (including including gold-copper-silver , gold-copper , gold -silver )

4. Density Tester for Precious metal With the function of HI and LO limit , the wide karat range from 9K to 24K and the data of HI and LO can be set freely .

5. With the mixture proportion function , it can test other precious metals , such as : platinum , silver , palladium , copper , rhodium.....and so on .

6. By adopting the design of big tank , it can decrease the inaccuracy caused by supporting wire's buoyancy

7. Density Tester for Precious metal Can't test the samples inlaid precious stones and hollow samples . It can be used as general balance .

Parameter:

Photo Show:

How about after-sales Service

(1)If errors occur, please refer to the troubleshooting tips of the instruction manual

(2)Please contact with our after-sales service department or distribution in time if can’t clear fault

(3)When you contact us with a service problem, we will act within 12 hours and provide solution within 24 hours.

(4) technical support, and 24 hours online service

(5)If the product have some big troubles and it must be sent back to our factory to repair during its warranty period, you just need to shipping the product to us and we will sent you a new one.The service is excluding if the machine is breakdown caused by following reasons:

a:Wrong operation
b:Fixed or refitted personally
c:The machine itself is not the reason caused breakdown
d:Applying the machine under the serious condition. Such as high temperature, moist, corrosive gas, or vibration.
e:Move or transportation as soon as installed
f:Consumables and easy-loss components
g:Natural disaster