UV bulb resistance anti yellowing aging instrument tester with turntable
Application
UV Lamp Aging Oven Tester can test rubber and plastic materials’ changes of strength, elongation,ect. before and after aging. It is generally acknowledged that materials keeped in 70 °C aging chamber is amount to whitch keeped normally for 6 months. It contains an observation window through whitch changes inside can be seen,so that we don’t need to open the door and avoid making any error.
Relevant Standards: GB/T8830, ASTM D1148, ISO8580.
Character
Use hot wind cycle to heat;
Use SUS #304 stainless steel as inner material;
Use paint-coated processing as external material.
Specifications:
Model | LY-605A |
Temperature range | Normal+5℃~200℃ |
Internal size W×H×D(cm) | 50×60×50 |
External size W×H×D(cm) | 85×129×65 |
Accuracy of temperature | ±0.3℃ |
Distribution of temperature | ±0.5℃ |
Temperature controller | Electronic LED digital display, automatic play several micro PID temperature controllers |
Timer | 0~999min |
Test rack | Speed of 1~10rpm, adjustable, single-deck rotating stand |
Internal material | SUS mirror finished stainless steel |
External material | Special steel, galvanized antirust processing, the senior resin coating with the lacquer that bake |
Observation window | Whole sealing |
Safety device | Over-temperature power-off protection, Over-temperature protection, Over-time protection |
Standard accessories | 2 groups of unadjustable stainless steel layer |
Power | 1Φ, 220V, 50Hz |
Picture show: