Portable Plastic Testing Equipment , Digital Coating Thickness Gauge

Instroduction:

Portable coating thickness gauge, magnetic testing method is used, can quickly, no damage, precision

testing magnetic substrate on the non-magnetic coating, coating thickness. Can be used in the laboratory, also can be used in the engineering field. The instrument can be widely used in manufacturing, metal

processing industry, commodity inspection, and other areas of the test. Is the material protection

professional necessary instruments. FE quality needle can detect all non-magnetic coating thickness, such as coating on steel and iron paint, powder coating, plastic, porcelain, chromium, copper, zinc, etc.

Function:
Adopted the method of magnetic thickness, measured the thickness of the magnetic non-magnetic coating

on metal substrates;
Single point calibration can be used with two two methods of calibration for instrument calibration;
"Can adopt basic calibration correction method to update a probe system error correction, ensure

instrument in the process of measuring accuracy;
Low negative display function, to ensure the accuracy of the instrument zero point calibration, improve the

test accuracy;
Low operating process hum tip;
When two shutdown mode: manual shutdown mode and automatic shutdown mode;
Low battery voltage indicator: low voltage tip;
Low power design, pack in standby state less than 10 microamps of current.
Low measurement: F induction.

Technical parameters:
1) Measuring range: 0 ~ 1250 um (the other range can be customized)
2) Resolution: 0.1/1
3) The thinnest base: 0.4 mm
4) Minimal surface: Convex/concave 5 mm to 5 mm
5) The minimum measurement area:10 * 10 mm
6) Accurate precision measurement error:
The zero calibration: ± (1 +3% H);
Two point calibration:±【(1%～3%H)】H+1.5
7) Using the environment:
Temperature: 0 to 40 ℃
Humidity: 10-85% RH
8) Metric/inch: convertible
9) Body size: 102 mm x 66 mm x24mm
10) Weight: 99 g (including battery)
11) Power supply: 2 5 batteries
12) Attachment:
Standard five pills: 50 microns, 100 microns, 250 microns, 500 microns, 1000 microns
(optional: 12 microns, 25 microns)
Matrix substrate 1 piece (iron)
1 specification
Cell 2 section

Photo reference: