Liyi CE ISO Approved Rapid Change High And Low Alternating Box Temperature Thermal Shock Test Chamber
Programmable Thermal Shock Test Chamber is used to test the bearing extent of the material structures and composite material in an instant and continuous high temperature and extremely low temperature environment, that is in the shortest time to test its thermal expansion and contraction caused by chemical change or physical harm, which is widely used in metal, plastic, rubber, electronics and other materials and it can be used as an important reference for improving product quality. It meets the standard of MTL, IEC, JIS, GJB...
Inner Size(mm) | 400×350×300 | 400×500×400 | 500×600×500 | 500×750×600 |
Temperature Range | High temperature chamber:RT~+150°C Low temperature:RT~-60°C | |||
Temperature Deviation | Less than ±2°C | |||
Temperature Conversion Time | Less than 10S | |||
Temperature Recovery Time | Less than 5min | |||
Coolting System | Water-cooled or air-cooled, Tecumseh compressor in France, Environment friendly refrigerant | |||
Controllor | Programmable temperature controllor | |||
Temperature Sensor | PT 100 *3 | |||
Setting Range | TEMPERATURE : -100.00+200.00°C / TIME : OH1M ~ 9999H 59M / CYCLE ~ 10000 CYCLE | |||
Resolution | TEMPERATURE : 0.01°C / TIME : 1 MIN | |||
Output Mode | PID + PWM + SSR CONTROL METHOD | |||
Simulated Load IC (KG) | 3.5kg | |||
Standard Accessories | Cable hole, lighting equipment | |||
Cooling System | Water-cooled/air-filled type | |||
Power | AC380V/50HZ Three-phase four-wire ac power | |||
Additional Features | The outlet and return it checks for taste known control /CM BUS (RS-485) remote monitoring management system /Ln2 liquid nitrogen rapid cooling control device | |||
Remarks | It can be customiazed according to customer demands. Technology index refer to product description.Delivery time within 45days. |