LK206 GPS Tracker Vehicle GPS+GSM+GPRS Wireless Network

Ultra-miniature multi-function GPS locator] [platform] real-time location, at any time to check the car, fleet management, electronic fence, day and night smart fortification, GPS + A-GPRS dual-mode satellite positioning, car shock alarm, remote flameout, 60 days history track, statistics package to download. [Search vehicles] phone + web + client + SMS + micro-letter search vehicles. Ultra-light ultra-small, precise positioning, manufacturers, wholesale, Switzerland chips, military quality, smart power.

Key Features:

1.GSM Quad-band

2.GPS+GSM+GPRS wireless network

3.High sensitive GPS chipset

4.Real-time tracking

5.Built-in GSM&GPS antenna

6.Built-in ON/OFF power, wide voltage input range

7.Built-in acceleration sensor for vibration alarm

8.Support ACC detection, real-time reporting car status

9.Built-in 800mAh battery for alarm when the power supply is disconnected unexpectedly

10.Tele-cut off (petrol/electricity) function

11.Check location information via SMS and GPRS(TCP)

12.SOS button for SOS alarm

13.Voice monitor function

14.Built-in CPU, eliminating breakdown automatically

15.Three LED indicators: GPS-blue; GSM-green; Power-red

16.Check location via platform

Specifications:

1.GSM: 850/ 900/ 1800/ 1900 MHz

2.GPRS: Class12, TCP/ IP build in GSM Module

3.GPS: MT3326

4.GSM antenna: built-in quad band

5.GPS antenna: built-in GPS high gain ceramics patch antenna.

6.GPS Channels: 20

7.Tracking sensitivity: -159dBm

8.Acquisition sensitivity: -144dBm

9.Locating time cost: Hot start:<1 sec(open sky),

10.Warm start: <38 sec,

11.Cold start: <45 sec(open sky)

12.Application environment: Operating temperature: -25°C to +60°C

13.Operating humidity: 5% to 95% non-condensing

14.Battery: 3.7vDC/450mAh

15.Monitoring range: 5M

16.Working voltage/current: 12-45vDC/90mA

17.Dimensions: 90.0(L)x 45.0(W)x 10.0(H)mm

18.Weight: 85gns:e-mark

How to use the tracker :

1. Put the SIM card and battery in place.

2. Turn on the unit outdoors by pressing the “on/off” button until the indicator is on.

3. For first use, please initialize the unit and restore it to default setting. (Please refer to 5.4 for instruction.)

4.In 10 or 40 seconds, the unit will begin to work and acquire the GSM signals as well as the GPS signals.

The indicator will keep flashing every 3 seconds when the unit has received the signals.

5. When this unit receives GPS signals normally, you can use it and do any setting as the instructions of this manual.