Strong self-priming Chemical Additives Transfer Rotary Lobe Pump

Description

Operating principle

The parallel , 2-shaft design is common to all Rotary Lobe Pumps. The external synchronizing gear rotates the shafts in opposite directions.

The displacement rotors are fitted on the shafts within the pump casing. The clearances between the rotors and casing are minimized to completely isolate the suction and pressure areas of the pump.

The rotation of the rotors creates a series of chambers within the pump casing. Product fills the chambers on the suction side and is rotated circumferentially to the pressure side. This produces a uniform flow from the suction to the discharge side with no need of valves. The stress to the fluid is negligible as the product is transported almost free of shear and with little pulsation and acceleration.

The Components

1. Bearing and timing gear

2. Intermediate chamber

3. Casing in Block design

4. Axial and radial casing liners

5. Shaft seals

6. Rotary Lobes

7. Quick-release-cover

8. Non-wetted shafts

Specifications:

Design 1 | Short , straight pipe connectors with connection flange and gas ket , in mm / inches approx.

Product features:

1. Gap is kept between the rotors and rotors & pump body, no friction, long using-life.

2. Simple assembling and disassembling, easy to maintenance and clean, less easily-damaged parts.

3. High efficiency and energy-saving, low failure, reliable sealing and low noise.

4. In the same type pump, different type rotor can be interchanged.

5. Capable to pump the viscous medium from 1cp to 2million cps.

6. Capable of pumping mixture of gas, fluid and solid medium.

7. Equipped with inverter, the flow can be adjusted as requirement of end-user.

8. Flange, screw or clamp connection can be selected as required.

9. Higher hygienic grade, support CIP, SIP. The surface roughness is 0.2--0.6mm, got 3A, FDA certification.

10. Hygienic safety valve is built-in structure.

FAQ:

Q: How can I make order online?

A: Email or WhatsApp / Wechat , .you can ask any question ,after we confirm the detail, we can make order.

Q: Do you have MOQ limit?

A: The MOQ is 1 set.

Q: Which payments are acceptable?

A: T/T, L/C, Western Union, Paypal

Q: Which shipping terms are available?

A: By sea, air, Express

Q: How about the delivery time?

A: Delivery time is normally 3-7 working days after confirm the money. Depends on your quantity.

Q: What guarantee do you have?

A: The product warranty period is 2 years, except for wearing parts (if the product fails to work normally due to poor manufacturing, the company will replace and repair products and parts for users free of charge. Product damage caused by human causes is not covered by the warranty).

Q: Can I purchase parts separately?

A: Yes, all pump spare parts can be purchased separately