deep-water lobe pump / resistance solids / reversibility / seawater / vacuum

In order to fix working platforms or wind turbines on the high seas, suction piles are frequently used which can also serve as a foundation.

The suction piles mostly made of steel have a cylindrical shape and are open on one side. With the open side pointing downwards, the suction piles are sucked into the seabed due to the creation of a vacuum and then hermetically sealed. In order to create this vacuum, the seawater situated in the cylinder is pumped from the suction pile. Accuvon rotary lobe pumps are used for this purpose.

Due to their compactness, resistance to solids and reversibility, Accuvon rotary lobe pumps are perfect for this application. Two Accuvon pumps are installed on a submersible module and driven by a hydraulic motor. In order to achieve a high flow rate, the two pumps can be operated simultaneously. With high pump pressures, the pumps are switched in series.

Accuvon pumps are used when fixing suction piles at water depths of up to 3,000 m. In order to increase the resistance of the pump casing to the aggressive seawater, Accuvon has developed the Black Protection surface treatment. Thus, the service life of the deep-water pump can be further increased.

Application data:

Technical data:

Advantages of this Accuvon AP 100

- Increased service life due to Black Protection treatment of the pump casing

- Short-term dry-run capability

- Pressure-resistant

- Reversible

- Resistant to solids

- Compact design

- Ease of maintenance

Similar application of chemical:

Accuvon provides many applications on-board ships and in other areas of the marine industries - from handling of both fresh and seawaters to fuels of all kinds, oil or oil sludge, bilge or other water-oil mixtures, fish or fish waste, sewage or other fluids with or without solids, of low or high viscosities.

Sewage | Ballast Water | Bilge / Loading | Oil Sludge | Fuel / Crude Oil | Oil-Water Separation | Fish / Kitchen Waste | Mud | Emulsions | Oilfield Chemicals | Marine Diesel Oil | as Skimmer Pump

Features of Accuvon Rotary Lobe Pumps:

1.Self-priming, Valve-less, Positive Displacement Pump

2. Easy Maintenance through Front Cover

3. Controllable Flow, Ratio up to 1 : 5

4. Capacity of up to 3200 m³/h

5.Pressures of up to 25 bar

6. Dry-running Capability

7.Reversibility, same pump output for both directions

8. Gentle, Low-Pulsation Pumping

9.For Viscous, Solid, Abrasive or Shea-sensitive Mediums

10. Low Parts Replacement Costs

Components of a Accuvon Rotary Lobe Pump

1 Timing gear

2 Quench and control chamber

3 Casing in block design

4 Unwetted shaft

5 Axial and radial casing protection

6 Shaft seal

7 Rotors

8 Quick-release cover