Solid Particle Resistant Efficiency Rotary Lobe Pumps For Waste Water Treatment

Rotary lobe pumps

Our Rotary lobe pump is very suitable for use in Waste water treatment ,The cost-effectiveness of a waste water treatment plant depends mainly on the efficiency of its components. Each one of our components plays a part in ensuring efficiency. And when individual machines are combined, new possibilities for cost-effective operation

emerge. In this way, we can offer reliable products and efficient solutions for pump and maceration technology – tailored to your specific needs.

Function

Due to the unique separation between the pump and gear chamber, the ACCUVON lobe pump offer you maximum operational safety. This means that no penetration of the medium into the bearing housing is possible in the case of a product leak. In addition, the innovative design allows you to inspect the mechanical seals visually. This enables you to react at an early stage if necessary. Thanks to the function of the rotary lobe pumps, you can also safely convey both low and high viscosity media. Due to the significant free ball passage and the low speeds, the positive displacement pumps are insensitive to blockages, clogging and foreign bodies. Varying solids contents have just as little influence on the flow rate as pressure changes. This enables continuous and powerful pumping.

Specifications:

Construction

• The rotary lobe pump

The powerful rotary lobe pump is designed and manufactured individual to suit your application.

• Direct drive coupling

The electric motor is coupled directly to the cylindrical pump shaft by means of a hollow shaft

• The motor

The pump is driven by an electrical parallel shaft helical gear motor.Upon request, the motor can be equipped with a frequency converter.

• The chassis

The pump is installed on a chassis made of stainless steel Thanks to the four solid-rubber tires the pumps very easy to move By slightly pressing down the pushing device. The pump can be steered very easily.

Advantages

+ 16 pump sizes with flow rates of 1–3200 m³/h

+ With and without casing protection plates and liners

+ Pumping in slurp operation

+ Resistant to solids and self-priming

+ Ease of maintenance thanks to MIP

+ Different drive options

+ Short-term dry-run capability

Testing Photo