High-Corrosive / High-Viscous Hand Cart Lobe Pumps With Electric Motor

Handcart rotary lobe pumps

Hand cart pumps can be pushed very easily to different application sites without any additional auxiliary means and are ready for use right away.

Whether on two or four wheels, in ATEX- or TA Luft-compliant design,whether with control technology or frequency converter - with the wide range of equipment and additional parts, Accuvon is able to build hand cart pumps optimally suited for almost any application.

Operating Principles:

When pump lobes rotates, the space between 2 lobes increase, it will create a partial vacuum to transfer fluid into pump chamber, The pump shaft keeps turning, lobes will continue to create space to delivery fluid, the tolerance between lobes and chamber ensure the space is suitable to filled. When the pump chamber is fully filled, the fluid will be transfer to outlet.

Specifications:

Construction

• The rotary lobe pump

The powerful rotary lobe pump is designed and manufactured individual to suit your application.

• Direct drive coupling

The electric motor is coupled directly to the cylindrical pump shaft by means of a hollow shaft

• The motor

The pump is driven by an electrical parallel shaft helical gear motor.Upon request, the motor can be equipped with a frequency converter.

• The chassis

The pump is installed on a chassis made of stainless steel Thanks to the four solid-rubber tires the pumps very easy to move By slightly pressing down the pushing device. The pump can be steered very easily.

Application

• Replacement pump for pump maintenance
• Product filling operation
• Hazardous material pump
• Mining pump
• Technical center pump
• Removal of residues from tanks
• For emptying/filling tanker trucks
• Wine transfer pump
• For emptying lBCs, barrels, etc.

Advantages

• High degree of operational safety due to double-acting mechanical seals

• Steel rotors with screw profile for low pulsation

• Pump is permanently technically tight

• Pressure-resistant

• Almost pulsation-free pumping

• Pumping of highly viscous media

• Ease of maintenance with MIP (Maintenance in Place)

• Resistant to solids

• High efficiency with pressures of up to 25 bar

• Pump speed can be adapted to the viscosity of the medium

• Short-term dry-run capability

• Pressurized, double-acting mechanical seal

• Self-priming

• Flexible flow rate

• Short-term dry-run capability

• Pumping of highly viscous media

• Pump made of stainless steel

• Quick emptying of tank

• Chemically highly resistant materials

• Small footprint

• Reversible

• Variable speeds

• Changing the rotors in a few minutes

Testing Photo