Oilfield Extractable Fluid Lift Lobe Pumps With Heat Preservation Device

Accuvon rotary lobe pumps

Oil products and chemical unloading pumps are typical applications in petrochemical technology. Accuvon provides its rotary lobe pumps for oil products transportation. Pump meets theAPI676 and the sealing system meets the API682.

Accuvon rotary lobe pump has a strong hybrid transport capacity of gas and liquid, which can empty the products in the pipeline. In addition the pump also allows short -time drying, has stable unloading, simple process, and high efficiency. It is currently widely used by large chemical companies such as Sinopec and PetroChina.

Oil products must ensure no sparks, electrostatic.and leakage during the transportation.Accuvon pump is equipped with brass rotor and FKM rotor through anti-static processing to ensure the safety of transporting flammable and explosive and easy to corrode products.

Technical Date:

Unrivaled Low Maintenance

Due to the cantilevered carrier design of the pump, the wear parts stressed by the pumped media can be replaced through the quick-release cover of the pump. All maintenance work can be done without the need to remove piping and the drive system.

Outstanding Range Of Material

The correct selection of material is important for the durability of a pump. For this reason, all components of our pumps are available in different materials. Using a modular principle, the most resistant material most suitable for the relevant pumped medium is selected for each pump component, from the O-ring to the pump casing.

Unique Block Design

Each rotary lobe pump is equipped with a non-segmented pump and gear casing. This design reflects our high quality standard and guarantees long service life with ease of maintenance. The pump casing can be manufactured in cast iron, cast steel, stainless steel, duplex steel or Hastelloy.

Advantages

• High degree of operational safety due to double-acting mechanical seals

• Steel rotors with screw profile for low pulsation

• Pump is permanently technically tight

• Pressure-resistant

• Almost pulsation-free pumping

• Pumping of highly viscous media

• Ease of maintenance with MIP (Maintenance in Place)

• Resistant to solids

• High efficiency with pressures of up to 25 bar

• Pump speed can be adapted to the viscosity of the medium

• Short-term dry-run capability

• Pressurized, double-acting mechanical seal

• Self-priming

• Short-term dry-run capability

• Pumping of highly viscous media

• Quick emptying of tank

• Chemically highly resistant materials

• Small footprint

• Reversible

• Changing the rotors in a few minutes

Testing Photo