Resistant Wear Rubber Rotor Degasser Pump Transfer Produced Water To Tank

Accuvon rotary lobe pump

Accuvon is a specialist in rotary lobe pumps. We offer solids-resistant rotary lobe pumps with flow rates of 1–24,000 l/min and a large selection of equipment and additional parts. The pumps can be used as mobile, stationary or submerged versions.

Operating Principles:

When pump lobes rotates, the space between 2 lobes increase, it will create a partial vacuum to transfer fluid into pump chamber, The pump shaft keeps turning, lobes will continue to create space to delivery fluid, the tolerance between lobes and chamber ensure the space is suitable to filled. When the pump chamber is fully filled, the fluid will be transfer to outlet.

Specifications:

8 steps for your guideline to select ACCUVON pump

• What medium do you need to pump.
• Product viscosity in pump, line and at rest.
• Solid content and percentage concentration
• Specific gravity
• Capacity required
• Pumping temperature
• Discharge pressure or sketch of pipework system
• Suction pressure or sketch of pipework system

Outstanding Range Of Material

The correct selection of material is important for the durability of a pump. For this reason, all components of our pumps are available in different materials. Using a modular principle, the most resistant material most suitable for the relevant pumped medium is selected for each pump component, from the O-ring to the pump casing.

Variety Of Rotors

We offer a range of linear and screw rotors differentiated by geometry and material. Whether made of NBR, EPDM, FKM, stainless steel, steel or another material, we offer a suitable rotor for your application.

Unique Casing Protection

In order to prevent pump casing damage, e.g. due to abrasive or aggressive fluids, Accuvon pumps are equipped with casing protection. The unique casing liners and casing protection plates are available in different materials.

Advantage

+ 16 pump sizes with flow rates of 1–3200 m³/h

+ With and without casing protection plates and liners

+ Flow rates of 1–3200 m³/h

+ Highest degree of safety due to oil-filled quench chamber as standard

+ Large variety of materials for all components of the pump

+ A suitable rotor for each application

+ Almost pulsation-free, gentle pumping of sensitive media

+ Excellent volumetric efficiency thanks to the perfect rotor-casing combination

+ Large intermediate chamber for a maximum choice of sealing systems

+ Smooth running even at high pressures

Testing Photo