High Suction Reversible Rubber Sludge Lobe Pump For MBR Treatment

Accuvon rotary lobe pumps

Accuvon is a specialist in rotary lobe pumps. We offer solids-resistant rotary lobe pumps with flow rates of 1–24,000 l/min and a large selection of equipment and additional parts. The pumps can be used as mobile, stationary or submerged versions.

Technical Date:

Rotor And Casing Protection

Just the removable lobe tips of the patented rotor "Unique" have to be replaced in case of wear. Our Premium profile rotor has been especially designed for the biogas sector and offers long service life in case of pumped media containing fibers.The casing liners and casing protection plates protect the pump casing and can be replaced through the quick-release cover

in case of wear just as the single-acting mechanical seal. This way, the pump is like in a new condition within a few minutes.

Unrivaled Low Maintenance

Due to the cantilevered carrier design of the pump, the wear parts stressed by the pumped media can be replaced through the quick-release cover of the pump. All maintenance work can be done without the need to remove piping and the drive system.

Outstanding Range Of Material

The correct selection of material is important for the durability of a pump. For this reason, all components of our pumps are available in different materials. Using a modular principle, the most resistant material most suitable for the relevant pumped medium is selected for each pump component, from the O-ring to the pump casing.

Unique Block Design

Each rotary lobe pump is equipped with a non-segmented pump and gear casing. This design reflects our high quality standard and guarantees long service life with ease of maintenance. The pump casing can be manufactured in cast iron, cast steel, stainless steel, duplex steel or Hastelloy.

Advantages

• High degree of operational safety due to double-acting mechanical seals

• Steel rotors with screw profile for low pulsation

• Pump is permanently technically tight

• Pressure-resistant

• Almost pulsation-free pumping

• Pumping of highly viscous media

• Ease of maintenance with MIP (Maintenance in Place)

• Resistant to solids

• High efficiency with pressures of up to 25 bar

• Pump speed can be adapted to the viscosity of the medium

• Short-term dry-run capability

• Pressurized, double-acting mechanical seal

• Self-priming

• Flexible flow rate

• Short-term dry-run capability

• Pumping of highly viscous media

• Pump made of stainless steel

• Quick emptying of tank

• Chemically highly resistant materials

• Small footprint

• Reversible

• Variable speeds

• Changing the rotors in a few minutes

Testing Photo