LV3095 2D bluetooth barcode scanner module,
seamless replacement for Motorola 955SE
Advantages:
lSeamless substitute for Motorola 955SE for their same bottom screw hole and size.
lUpgrade your scanning application from 1D to 2D directly.
lLV3095 is able to scan mobile phone screen 2D barcode
lNo need to change the mold, saving your huge costs to remake the mold
lNew starter to prepare for the brand new era of 2D barcode.
Features:
l2D Barcode Decoder Chip:
The engine armed with the state-of-the art 2D barcode demonstrates unprecedented reading performance.
lTwo-In-One Design:
Seamless integration of CMOS image sensor and decoder board makes the engine small, lightweight and easy for integration.
lHigh Performance & Ultra-Low Power Consumption:
The engine can read most 1D and 2D barcodes with a power consumption only one fourth that of a traditional engine.
lAll-Round Scanning Capability:
It can read barcodes on virtually any medium paper, plastic cards, mobile phones and LCD displays.
Specification:
Performance | |
Image Sensor | 752 ×480 CMOS |
Illumination | RedLED 625 ±10 nm |
2D Symbologies 1D | PDF417QR Code(Model 1/2, Micro),Data Matrix (ECC200,ECC000,050,080,100,140) Code 128 ,EAN-13,EAN-8 ,Code 39,UPC-A,UPC-E ,Codabar ,Interleaved2 of 5,ISBN/ISSN ,Code 93 ,UCC/EAN- 128 ,GS1 Databar,etc |
Precision | ≥ 5mil |
UPC-A (13mil) Depth of FieldCode 39 (20mil) PDF 417 (6.67mil) Data Matrix (10mil) QR Code (20mil) | 55mm -270mm 50mm -340mm 70 mm-165 mm 55 mm -180 mm 35 mm -275mm |
Symbol Contrast | ≥ 30% |
Scan Angle | Roll: 360;Pitch: ±50;Skew: ±50° |
Field of View | Horizontal 36°; Vertical 23° |
Mechanical/Electrical | |
Interface | TTL - 232 ,USB(HID-KBW,Virtual Serial Port),DATAPIPE ,HID- POS) |
Operating Voltage | 3. 0 ~ 3.6 VDC |
Operating Current Current @ 3.3 VDC Sleep Current | 230 mA 40mA |
Dimensions | 21.17(W) ×14.6 (D) ×11.52(H) mm |
Weight | 4.4g |
Environmental | |
Operating Temperature | - 20°C - +60 °C |
Storage Temperature | - 40°C - +8 0 °C |
Humidity | 5% - 95% (non-condensing) |
Ambient Light | 0 ~ 100000 lux (natural light) |
Accessories | |
EVK3000 | Software development board for theLV3095, equipped with a trigger button, beeper andRS-232 & USB interfaces. |
RS-232 Cable Cables USB Cable | Used to connect the EVK3000 to a host device; equipped with a power connector. Used to connect the EVK3000 toa host device. |
Power Adaptor | Used to provide power for the EVK3000. Output: DC5V, 2A; Input: AC100~240V, 50~60Hz |