The inner pot has an agitator to a stirring effect.
Body Material:
a). Stainless steel inner pot(SUS304/SUS316L), carbon steel outer pot (Q235-B) treated with anti-rust paint
b). the whole machine is made of stainless steel (SUS304/SUS316L)
Characteristics
1. This machine can be CIP cleaned online, SIP sterilization (121°C/0.1MPa).
2. Designed in accordance with sanitary requirement, so the structural design is very user-friendly and easy to operate. While, smooth transmission, low noise.
3. There is appropriate diameter; the stirring device is made on demand, energy-saving, stirring, good fermentation effect.
4. The inner surface is mirror-polished (roughness Ra≤0.4µm); the weld of the inner pot with inlet, outlet, sight mirror and manhole use stretch flanging arc transition. No dead corners ensure the reliability and stability in the producing process.
Technical Parameters
Volume | 300L | 400L | 500L | 600L | 800L | 1000L | 1500L | 2000L | 3000L |
Body diameter(mm) | Φ800 | Φ800 | Φ900 | Φ1000 | Φ1000 | Φ1000 | Φ1200 | Φ1300 | Φ1600 |
Body height(mm) | 600 | 800 | 800 | 800 | 1000 | 1220 | 1220 | 1500 | 1500 |
Motor power(kw) | 0.55 | 0.55 | 0.75 | 0.75 | 0.75 | 0.75 | 1.5 | 2.2 | 3 |
Stirring speed(rpm) | 36r/min | ||||||||
Working pressure | ≤0.09Mpa | ||||||||
Working temperature | <100°C | ||||||||
Accessories | Sanitary manhole, cleaning ball,safety valve,pressure gauge |
Notes:
1. The nominal capacity and size in the chart is standard configuration. Any specific requirements, please point out.
2. The jacket working pressure≤ 0.09Mpa also can be made according to customers’ requirements.
3. The process parameters that need provided when choosing the fermentation tank: the nature of material, working pressure, temperature, specific requirements, etc.