Fast Production High Strength Liquid Silicone Rubber molding compund Material Headphones & Watch

Description

RH6250-30T is two-component Platinum curing liquid silicone rubber for Injection mold making . It can be used for mold making for anti-slip mat,artificial prosthesis, making soft silicone rubber products like human body shape, bra pads, diving glasses, shoulder pads, patch, anti-slip mat, watch, headphones,making and also can be used for pouring material for electronic and electrical parts, etc.

Key Features and Benefits

Vulcanisates consisting of RH6250-30T LSR are distinguished by the following properties:

• Neutral odor and taste
• High recovery after a puncture
• Excellent biocompatibility
• Good transparency
• High thermal stability
• Easy pigmentable with the LSR Colour Pastes
• High stability to ozone and ultraviolet light
• Sterilizable with ethylene oxide, steam and gamma radiation

Typical Properties

These figures are for reference only, please contact us for details.

Typical properties of the vulcanisate:

The mixing ratio of components A: B = 1: 1.

Vulcanisation: 5 min. 150 °C + 4 hrs. 200 °C post cure

Application

Rui-He® RH6250 - 30T are Platinum curing mainly used for Watch, Headphone, silicone prostheses, silicone mask, ultra-realistic replicas of the face, silicone fake skin, silicone animatronic skin, silicone baby mat, silicone baby doll, etc.

Certificated

Rui-He RH6250 - 30T Two components Liquid silicone rubber obtained the following test certificate: RoHS, FDA, MSDS, LFGB, ETC.

Packaging & Storage

• RH6250 - 30T FDA, LFGB,Food grade is available in 20kgs pails or 200kgs drums.
• Store in a cool dry place out of direct sunlight, use it within 12 months from the day of manufacture.

Notice

This product cannot be contacted with compounds containing N, P, S to avoid affecting the catalytic effect of platinum.

FAQ

Q: Why is the silicon mold oily?

A: The molding silicone rubber itself doesn’t contain any oil, so it won’t be oily. If the mold is oily, it may be because of two reasons:

You add the compound silicone oil (the compound of silicon oil and white oil). The white oil is not silicon oil but a kind of petrochemicals.

Your supplier adds to much silicone oil when they producing silicone rubber or reducing the hardness of silicone rubber.

Q: How to get rid of the bubbles during my mold making?

A: After mixing liquid silicone with a curing agent, please put the materials into the vacuum machine to take off the bubbles

If you need to know the prices of our silicone rubbers, please contact us. We do not provide prices on the website because prices fluctuate for many reasons.