Excellent Optical Transparency Two Components Silicone Rubber Odorless For Funny Accessories

Typical Properties

These figures are for reference only, please contact us for details.

The mixing ratio of components A: B = 1: 1.

Vulcanization: 150 °C / 5 min

Why do you choose RH5350-40?

• Good transparency
• High stability to ozone
• UV light resistance
• Micro-crack resistance
• High transparence / Good transparency
• High tear and tensile strength
• Good rebound property
• Excellent resistance to acid and alkali
• Neutral odor and taste
• Sterilizable with ethylene oxide, steam and gamma radiation

Instructions

Here is a look at the LSR molding process:

1. LSR A + B components typically come in a 5-gallon pail or 55-gallon drum. A process controlled pumping kit presses down on the buckets to force the material into the static mixer and feed into the injection unit.

2. Then, streams of pigment can be added and controlled. In the injection, press material will be mixed together additionally with a screw and pushed forward to create a “shot” of material, or the amount needed to fill the mold.

3. After the material is injected into the mold, it will then stay clamped together to cure the LSR. Then, either an operator or a robot will remove the cured product from the mold and the cycle repeats. It is a very quick efficient process that typically averages 30 seconds.

Certificate

Rui-He RH5350-40® Liquid silicone rubber obtained the following test certificate: RoHS, FDA, REACH, PAHS, ISO9001:2016, etc.

Packaging & Storage

Available in 20kg pails or 200kg drums.

Store in a cool, dry place out of direct sunlight, use it within 12 months from the day of manufacture.

Notice

This product cannot be contacted with compounds containing N, P, S to avoid affecting the catalytic effect of platinum.

If you need to know the prices of our silicone rubbers, please contact us. We do not provide prices on the website because prices fluctuate for many reasons.