Nipple Liquid Silicone Rubber Food Grade RH5350 - 60 High Transparency for Baby Supplies

Description

RH5350 - 60 two-component liquid silicone rubber is a kind of addition-cured silicone. It can be used for mold making for adult toys, artificial prosthesis, fake human breast, making soft silicone rubber products like human body shape, bra pads, diving glasses, shoulder pads, patch, anti-slip mat, baby nipples, pacifiers making and also can be used for pouring material for electronic and electrical parts, etc.

Key Features and Benefits

Vulcanisates consisting of RH5350 - 60 LSR are distinguished by the following properties:

• Neutral odor and taste
• High recovery after the puncture
• Excellent biocompatibility
• Good transparency
• High thermal stability
• Easy pigmentable with the LSR Colour Pastes
• High stability to ozone and ultraviolet light
• Sterilizable with ethylene oxide, steam and gamma radiation

Typical Properties

These figures are for reference only, please contact us for details.

Typical properties of the vulcanisate:

The mixing ratio of components A: B = 1: 1.

Vulcanisation: 5 min. 150 °C + 4 hrs. 200 °C post cure

Application

Rui-He® RH5350 - 60 are mainly used for Breast enhancer, body organ, sex dolls, sex toys, silicone prostheses, silicone mask, ultra-realistic replicas of the face, silicone fake skin, silicone animatronic skin, silicone baby mat, silicone baby doll, etc.

Certificated

Rui-He RH5350 - 60 Liquid silicone rubber obtained the following test certificate: RoHS, FDA, MSDS, LFGB, ETC.

Packaging & Storage

• RH5350 - 60 is available in 20kgs pails or 200kgs drums.
• Store in a cool dry place out of direct sunlight, use it within 12 months from the day of manufacture.

FAQ

Q: Why is the tear strength of the silicone mold weak?

A: There are three reasons:

1. In order to reduce the viscosity of silicone rubber and pursue a good quality, you may add a lot of silicone oil into the silicon rubber when making molds. In fact, it might have just the opposite effect. The tension and the tear strength will be reduced badly with the addition of silicon oil. And the silicon molds will be in a weak and flimsy manner.
2. You may add too much catalyst into the silicone rubber, we suggest customers add catalyst no more than 5%, 2%will be perfect.
3. You may use the silicone mold too early after it finished. We suggest the customer begin using the molds after 24 hours. What’s more, it will be better if you can make an outer mold to protect the silicone mold.

Notice

This product cannot be contacted with compounds containing N, P, S to avoid affecting the catalytic effect of platinum.

If you need to know the prices of our silicone rubbers, please contact us. We do not provide prices on the website because prices fluctuate for many reasons.