Screw Type Rotary Compressor Fixed Frequency 7bar 10bar 13bar Stable And Durable With Low Noise

WHAT IS COMPRESSED AIR USED FOR?

Compressed air can be used in one of two ways:
As an energy source
As blowing air (“active air”)

When used as an energy source, compressed air can power air tools and production equipment. These tools and equipment are used in countless applications across dozens of industries, including construction, tire service, mechanical repair, maintenance, factory production, industrial processes, and vehicle safety systems. Even roller coasters use compressed air.

Active air is used when a steady stream of air is needed for a task. A couple of fairly literal applications for active air is aeration and medical breathing air buttons of industries, ranging from pharmaceutical and chemical companies to food and beverage plants, use compressed air in their production of goods and services.

Technical Parameters:

Machine Details:

1.Control Panel
Advanced microcomputer PLC fully automatic programmable, protection device control system. English control system, easy to operate, can work automatically 24 hours without supervision.

2.Efficient Screw Airend
High-precision twin-screw rotor, triple-glazed, less wearing parts, compact structure, large air delivery, high stability.

3.Full Copper Core High Efficiency Motor
High-performance motor, insulation class F, heavy-duty bearings, 3~5% higher efficiency than similar products.

4.Intake Valve
The air intake valve can automatically adjust the air volume from 0 to 100% according to the requirements of the system air volume, and the pressure loss is small.

Why choose screw air compressor?

1. The screw machine is a box-type structure, which is easy to install, and the installation cost of the piston machine is high;

2. The vibration of the screw machine is small, the operating efficiency is high, and the electric energy consumed by the piston machine is higher than the parameters;

3. The screw machine only needs to be replaced and maintained on time, and the piston machine has many parts and high maintenance costs;

4. The screw machine is a rotary operation with low noise, and the piston machine is a reciprocating motion with high noise.

Machine Image:

Factory & Warehouse Overview:

Maintanence Details:

How long does the air compressor need to be maintained?

1. 500 hours: When the air compressor runs for 500 hours, the oil filter element and air compressor lubricating oil should be changed for the first time after the new machine is used. Remove the air filter for cleaning and blow it out from the inside out with low pressure compressed air. Do not blow air from the outside to the inside to avoid clogging.

2. 2000 hours: When the air compressor runs for 2000 hours, check whether the pipe joints, bolts and terminal screws are loose, and tighten them if any. Replace the "three filters and one oil". Check all solenoid valves and whether the protection differential pressure switches operate normally.