BSD68601

Gasoline engine oil additive package

BSD68601 is a high quality functional additive package developed for API SL/SJ/SG/SF grade

of gasoline engine oil. It is composed of metal detergent, ashless dispersant, long-chain ZDDP

antioxidant and anti-corrosion agent, phenolic amine high-temperature antioxidant and metal

deactivator. It is a low phosphorus, low sulfur, low ash, emission reduction, energy saving and

environmental protection gasoline engine oil additive package.

Product Features

●Excellent low-temperature dispersion, high-temperature oxygen resistance, high-temperature

rust resistance, outstanding anti-wear and antifriction, which can effectively control the formation

of oil sludge, bearing corrosion, wear scratch and oil oxidation, and improve the durability of

components, oil, seal and exhaust system.

●Improve the compatibility with catalyst, prevent the poisoning failure of catalyst in three-way

conversion unit and the failure of oxygen sensor monitoring air-fuel ratio

●Reduce harmful gas emissions and improve fuel economy

Recommended Dosage (wt%)

API SF 3.5%

API SG 4.0%

API SJ/GF-2 5.5%

SL/GF-3 6.0%

Typical Inspections

Product Appearance

Packaging and acceptance
This product is packaged in standard iron drums, or in BIC ton drums or other packaging forms according

to customer needs.
Product identification, sample retention, and delivery acceptance shall be carried out in accordance with

SH/T0164 standard.

Product storage, transportation, and compounding agent blending operations and precautions
The product shall be stored, loaded and unloaded in accordance with the SH/T0164 standard, and must be

clearly labeled during transportation, storage and use to prevent mixing and cross contamination with other

petroleum products;
When adjusting oil, the maximum temperature should not exceed 75 ℃;
Long term storage temperature should not exceed 50 ℃.
Single dose and composite product shelf life: 24 months (at ambient temperature). After opening and using,

pay attention to sealed storage.

Health and Safety
The products in this manual are non flammable, non explosive, and non corrosive, and are similar to general

petroleum products in terms of safety, environmental protection, and use.
Avoid prolonged or repeated contact with the skin during use, prevent accidental ingestion, and keep away

from children.
Wear protective gloves when using, and the operator does not need to take special safety precautions. Once

it splashes into the eyes or skin, rinse thoroughly with plenty of water.
Store the product in a cool, dry, and well ventilated place, away from sources of fire. Heat source.
Waste packaging materials, oil liquids, and waste residues should be handed over to qualified units for recycling

and disposal, and are prohibited from being discharged into water bodies or soil.
For other health and safety information, please refer to the Product Safety Data Sheet (MSDS).