LUMINTOP C01 Rechargeable LED Flashlight Bicycle Headlight With Low Power Warning
Designed for urban cycling commuting, C01 is a versatile rechargeable bicycle headlight. By adopting the anti-glare multi-faceted reflector, it produces an equal ray, takes care of near and diatance illuminnations. At the same time, it prevents dazzle to the oncoming people and vehicles. Utilizes Cree XP-G3 neutral white LED,it has better penetrability, even in rainy and foggy weathers. Three general output levels plus Strobe, SOS, and Beacon with a max output of 400 lumens, it meets the commuting and daily lighting demands. the built-in 1,400mAh high-capacity lithium polymer battery provides a maximum runtime of up to 10.5 hours whicha meets long-distance cycling requirments. Micro USB direct charging function allows you to charge the light at any time to ensure a sufficient power of your ride. Charging indicator, low-power warning, quick release structure,IPX-8 waterproof design etc. C01 is your reliable partner in daily commuting, road riding, or in daily use.
Operation
ON/OFF: Click the switch for ON, long press the switch for 1 second for OFF.
Output selections: When the light is on, click the switch to cycle through Low-Med-High. Next time you turn on the light, it will recall the previous output level.
Flash: When the light is on, press and hold the switch for 4 seconds to enter Strobe, another switch to cycle though Strobe-SOS-Beacon.
Features
Technical Parameters
ANSI/ NEMA FL1 | High | Med | Low | Strobe | SOS | Beacon |
Output | 400 Lumens | 225 Lumens | 75 Lumens | 400 Lumens | 400 Lumens | 400 Lumens |
Runtime | 1h 45min | 3h 30min | 10h 30min | / | / | / |
Intensity | 5472cd (Max) | |||||
Distance | 150m (Max) | |||||
Impact Resistance | 1.5m | |||||
Waterproof | IPX-8 | |||||
Battery | Built-in 3.7V/1400mAh Li-polymer battery | |||||
Size | 77.5*45*31.5mm (excluding handlebar mount) | |||||
Net Weight | 87.5g (excluding handlebar mount) | |||||
Accessory | 1*Bicycle light mount, 1*User manual, 1*Warranty card, 1*Micro USB Charging cable |
Low Power Warning
Micro USB Charging
Open the charging cover, plug in the Micro USB charging cable, connect with the power to start charging. When charging, the indicator is blinking red slowly and turns green when fully charged.
Notice: 1) When charging, the light supports to turn on and shift outputs (except flash modes). 2) After charging is complete, please put the protection rubber cover back to ensure the best waterproof performance.
Mounting and Dismount the Bicycle Light
Mounting: Follow the direction marked to push the light into the mount.
Dismount: Press and hold the lock, then to push the light off from the mount.
Warning