Gantry milling machine VL1200 Mitsubishi M80A Controller

Specifications:

Product Feature:

1. Bed-workbench 1) The lathe bed workbench, including the columns, beams, sliding saddles, headstock and other large pieces described later, are cast by high-strength cast iron materials and resin sand technology. These large pieces are optimized by 3D computer software, and the ribs and plates are arranged reasonably, which improves the rigidity and strength of the large pieces. 2) lathe bed-imported heavy-duty imported roller linear guide rail, with good accuracy retention, high sensitivity and precision of the workbench and excellent servo drive performance; At the same time, it has large bearing capacity and good cutting vibration resistance, which can improve the performance characteristics of machine tools, improve the precision and precision stability of machine tools and prolong the service life of machine tools. 3)X-axis drive-the servo motor rotates the ball screw (the size of the X axis is more than 3m) through the planetary reducer to drive the workbench to move back and forth on the lathe bed to realize the X-axis feeding movement, and the screw is pre-stretched to improve the rigidity of the screw pair.

2. Cross beam 1) The guide rail of the beam adopts vertical cross layout, with excellent mechanical properties, which can greatly improve the cutting accuracy and rigidity, ensure that the beam has sufficient bending stiffness and torsional stiffness, and the machine tool can meet the heavy load cutting. 2) The beam guide pair adopts imported heavy-duty roller linear guide rail, which has good accuracy retention, is suitable for strong cutting and has good running stability. 3)Y-axis drive-the servo motor drives the ball screw, which drives the sliding saddle to move left and right on the beam to realize Y-axis feed movement

3. Spindle box 1) The spindle box adopts square ram structure, and the Z axis adopts imported heavy-duty roller linear guide rail and four heavy-duty guide rails, which have good shock absorption and ensure smooth cutting during processing. 2)Z-axis drive-the servo motor drives the ball screw, which drives the spindle box to move up and down on the sliding saddle to realize Z-axis feed. Z-axis motor has the function of automatic braking. In case of power failure, automatic braking will hold the motor shaft tightly so that it cannot rotate. 3) The spindle group is produced by Taiwan Province professional factory with high precision and high performance. Grasping the cutter of the spindle relies on the disc spring on the spindle to act on the pulling nail of the handle through the four-claw broaching mechanism with tension, and the cutter is closely matched with the taper hole of the spindle to realize the grasping of the cutter. 4) The machine tool has the function of spindle orientation.

4. Pneumatic system Mainly used for tool clamping; Blowing at the center of the spindle; The front end of the spindle is sealed and blown.

5. Machine tool protection The bed guide rail (X axis) of the machine tool adopts stainless steel telescopic protective cover; The beam guide rail (Y axis) adopts organ protection; The whole machine tool is fully protected to prevent iron filings and coolant from splashing, so that the operator can work in a safe and comfortable environment.

6. Lubrication system 1) Three coordinate bearings are lubricated by grease. 2) Ball screw pairs adopt automatic thin oil lubrication. 3) Three-coordinate guide rail pair, with automatically controlled lubricating points, and lubricating oil is diverted to lubricate the guide rail pair, and the action is automatically controlled by the numerical control system .

7. Balance system The liquid nitrogen balance mechanism is adopted to ensure the stability of the spindle box movement, and the hydraulic cylinder is used to loosen the knife-disc spring tension automatic broaching device.

8. Cooling system The spindle end of ram has the function of external cooling of cutter, and the cooling liquid is generally non-corrosive liquid such as emulsion and lightly mineralized oil.