Aluminum Rolling Oil Regeneration Equipment (Turnkey Plant)
The indicators about before and after regeneration
Physico-chemical item | Pre-regeneration | Post-regeneration |
Dynamic Viscosity | 2.3mm2/s | 1.92mm2/s |
Flash point | 88 | 90 |
Acid number | 0.24 | 0.03 |
Moisture&mechanical impurities | 0.50% | None |
Heavy components | 5.53% | 1.10 |
Distillation | 216~270°C | 218~250°C |
Dry point | 282 | 265 |
Color degree | 5 | 0 |
We are choice to use the worst –quality waste aluminum rolling oil (collected from trench under rolling mill) to process. Through the inspection process, the rolling lubricating oil regenerated was fully satisfied to the requirements of cooling oil.
The following picture shows the comparison result before and after regeneration.
Complete plant contains:
1. Vacuum system
2. Thermal oil heating system
3. Electric control cabinet
4. Technical personnel training
5. Technical training and so on.
System Working Station:
Electronic Control Device: