Connector Technical Data | |||||||||
Ordering No | MD05P2LSAB | ||||||||
Contact No | 5 pin | ||||||||
Coding | A coded | ||||||||
Contact Resistance | ≤5mΩ | ||||||||
Insulation resistance | ≥ 100MΩ | ||||||||
Rated temperature | -25°C ~ + 70°C | ||||||||
Lock Type | Front Fastened or Rear fastened | ||||||||
Contact Carrier | PA66+GF | ||||||||
Screw Nut | Brass,CNC,Nickel-plated | ||||||||
Contact | Male: Brass, Female: Phosphor bronze | ||||||||
O ring | FKM Silicon | ||||||||
Pollution degree | 3 |
M16 male connector is 180 degrees straight. M16 panel mount connector needle core number of 5-pin, 8-pin. Protection: IP67; IP65 M16 Connector Features: UL standard wire or national standard, strong anti-interference, signal transmission and stability; aviation plug-side injection molding, beautiful appearance, with ordinary waterproof performance, long service life. All products are rigorously tested and meet the ROSH standard, in line with the reliability test and all electrical test requirements
Extremely Acid, Alkali, Chemical Cleaner Reagent Performance, Grease, Coolant, Lubricant and Emulsion Properties.
● Degree of protection IP 67 IP68
● 2P 3P 4P 5P 6P 7P 8P 12P are available
● Operating voltage: 250V ( 32V DC ) 125V ( 32V DC ) 60V ( 32V DC )
● Current rating : 7A 6A 5A 3A
● Straight or Right angled
● Lock type : Front Side Fastening or Rear Side Fstening
● Metal Shielded Housing
FAQ:
● What is a panel mount connector?
Panel Mount is a mechanical feature or features built into the design of a connector half. It allows the connector to be secured to an equipment panel, external case or enclosure. Often (but not always), connectors fitted with panel mount features will be cable connectors.
● What does chassis mount mean?
Chassis mount resistors are manufactured using wirewound resistor technology in a large ceramic core molded into an extruded aluminum, chassis-mount housing. ... For applications where the design of the resistor is to promote heat loss and cooling, a chassis mount resistor is an ideal resistor for your next design.
● Rear mount VS Front mount?
The rear panel-mount part installs from inside the box and has the jam nut on the outside of the case; the front panel one installs from the outside of the box and has the jam nut on the inside.