Application

The machine is a fully-automatic forming-sealing-packaging machine, and is applicable for packing butter,ketchup, sauce etc.

Features

1. Main part of the machine is made of stainless steel, that greatly improves the corrosion resistance of the equipment.
2. Modular moulds are applied that can be replaced easily and the machine can be used for multiple purposes.
3. Both thermoforming mould and sealing mould are equipped with water cooling system.
4. German BUSCH vacuum pumps with high extreme degree of vacuum and performance are fitted.
5. OMRON PLC, touch screen & servo motor are used with reliable performance and ease of operation.
6. Schneider or ABB protection relay & air switch are with long service life and good application.
7. With special holding chains, the packaging machine is applicable for extending and moulding of flexible film or rigid film of different thickness for special purpose packaging.
8. With advanced punching cutting systems, the machine’s replacement operation is more convenient.
9. There is a scrap and waste recycling system to help maintain environmental cleanness.

Technical Specification

1. Power supply: 380V/AC 50HZ three phase + neutral line.
2. Upper packing materials: heat-sealable films.
3. Lower packing materials: thermo-formable, heat seal film, rigid film is available.
4. Gas displacement of vacuum pump: 180m3/hour (thermoforming: 80m3/h, sealing: 100m3/h).
5. Power consumption of the machine: 10KW.
6. Compressed air consumption: 1m3/min.
7. Applicable gas pressure: 0.6Mpa.
8. Pneumatic consumption: 800-1000L/min, 6 bars
9. Cooling water: 4 liter/min.
10. Maximum upper film width: 380mm.
11. Maximum lower film width: 390mm.
12. Practical film width: 338mm.
13. Length per mould: 175mm.
14. Maximum drawing depth: 21-40mm (thermoforming depth depends on the tray size and film material).
15. Loading area: standard 1 meter, additional(optional)
16. Packing capacity: 6 cycles/min.
17. Control system: PLC programmable operation display(OMORON).