Custom Aluminum High Precision 5 Axis Milling CNC Machining Parts

We operate almost every kind of CNC mill and turning center, and pride ourselves on being able to machine whatever you need, from simple, 'as-machined’ work holdings to complex, organic geometries with tight tolerances.

On request, we can also produce parts with EDM and grinders. The accuracy of wire cutting is comparable to that of a grinder (0.005 mm unit)

* In addition to straight cutting, it can also cut into arcs and process complex shapes, such as a combination of straight and arcs.

* As long as it is a conductive material, it can be machined from sheet to cemented carbide regardless of the thickness, size, and hardness of the material. There is no direct contact between the tool electrode and the workpiece, but there is a spark discharge gap.

This gap is generally between 0.05~0.3mm, and sometimes it may reach 0.5mm or even larger. The gap is filled with a working fluid, and the high-pressure Pulse discharge discharges corrosion on the workpiece. There are many features measured by the CMM, and almost all types of dimensional measurements can be measured by the CMM. Through the structural features, it is possible to detect flatness, roundness, concentricity, etc.

What materials are generally chosen for CNC machining of medical products?

In medical products, the use of materials is particularly important. Once the material is not qualified may affect the patient's recovery, because the implant should be compatible with the human body, anti-allergic, high safety, and common such as extraction forceps, bone scissors, and hemostatic clips. surgical scissors, micro scissors, scalpels. etc. must also be safe and hygienic. In custom medical products, Yixin Precision has a variety of different models of titanium alloy, and stainless steel materials to choose from, with a spectral analyzer to the raw materials inspected to ensure the authenticity of the materials.

Service We Provide:

fine sandblasting parts

knurling parts

CNC engraving parts

powder coating parts

CNC machining parts

bending parts

4-axis CNC machining parts

anodize finished parts

Surface Treatments We Can Do:

Most CNC factories only focus on CNC machining but are not good at surface treatment. If the surface treatment of parts does not meet expectations, it will not only increase the cost but also affect the time to market products.

YMP has rich experience in the surface treatment of metal parts, and we will choose a suitable surface treatment process according to different parts' materials and uses.

The common surface treatments of YMP include: electroplating, electrophoresis, painting, powder spraying, sandblasting, polishing, shot blasting, laser engraving, etching, CD pattern, silk screen printing, wire drawing, blackening, anodizing, hard oxidation, thick film oxidation, micro-arc oxidation and so on. No matter what personalized requirements your parts need, we can meet them.

blackening

CD pattern

Electroplating

mirror finish

powder coating

etching

blasting

anodizing

Materials we used for CNC machining parts:

There are various parts that can be processed by CNC, involving a wide range of industries.

YMP has many years of experience in making OEM parts, and there are 475 kinds of materials. Basically, we can process all the metal materials in the market, and we are equipped with spectrometers to ensure the authenticity of the materials. So you don't have to worry about material problems when you choose YMP. We have stocks of aluminum alloy, stainless steel, magnesium alloy, titanium alloy, zinc alloy, nickel alloy, copper, steel, and so on.

aluminum alloy parts

brass parts

stainless steel parts

titanium alloy parts

Q: How soon can I get a reply after sending the inquiry?

A: 1. all inquiries will be replied to within two hours except during sleeping time in China.

2. Our call phones stand by any calls at any time.

Q: How soon can I get a sample?

A: Generally sample can be sent out within 7 days after the drawing is confirmed by both sides.

Q: If I don't have a drawing, how can I get a sample?

A: 1. you can send us your sample, we will scan it and make 2D and 3D drawings for your checking.

2. rough drawing by hand is also acceptable.

Q: What are many common materials that you use in projects?

A: Aluminum, Stainless Steel, Carbon Steel, Copper, Plastics, Titanium, PEEK, etc.

Q: What's your MOQ(minimum order quantity)?

A: We don't have MOQ, you are welcome to send us a trial order to test our quality and service.

Q: what payment term do you accept?

A: PayPal, TT, western union, L/C, etc.