Custom CNC Service Machining Aluminum Adapter For Skateboard

What kind of parts are suitable for precision machining? Yixin Precision will explain to you:

Compared with ordinary lathes, CNC lathes have constant linear speed cutting function. The end face of the car and different diameter of the outer circle can be processed at the same linear speed to ensure that the surface roughness value is constant and relatively small. Ordinary lathes are of constant speed and the cutting speed of different diameters is different. When the material of workpiece and tool, finishing allowance and tool angle are safe, the surface roughness depends on the cutting speed and feed speed.

When processing surfaces with different surface roughness, low feed rate is selected for the surface with small roughness, and high feed rate is selected for the surface with high roughness, the variability is very good, which is difficult to achieve on ordinary lathes. CNC precision machining has arc interpolation function, which can process various complex contour parts. For the parts with complex contour shapes, any plane curve can be approximated by straight line or arc.

Service We Provide:

fine sandblasting parts

knurling parts

CNC engraving parts

powder coating parts

CNC machining parts

bending parts

4-axis CNC machining parts

anodize finished parts

Surface treatments we can do:

Most CNC factories only focus on CNC machining, but are not good at surface treatment. If the surface treatment of parts does not meet expectations, it will not only increase the cost, but also affect the time to market of products.

YMP has rich experience in surface treatment of metal parts, and we will choose suitable surface treatment process according to different parts materials and uses.

The common surface treatments of YMP include: electroplating, electrophoresis, painting, powder spraying, sand blasting, polishing, shot blasting, laser engraving, etching, CD pattern, silk screen printing, wire drawing, blackening, anodizing, hard oxidation, thick film oxidation, micro-arc oxidation and so on. No matter what personalized requirements your parts need, we can meet them.

blackening

CD pattern

Electroplating

mirror finish

powder coating

etching

blasting

anodizing

Materials we used for CNC machining parts:

There are various parts that can be processed by CNC, involving a wide range of industries.

YMP has many years of experience in making OEM parts, and there are 475 kinds of materials. Basically, we can process all the metal materials in the market, and we are equipped with spectrometers to ensure the authenticity of the materials. So you don't have to worry about material problems when you choose YMP. We have stocks of aluminum alloy, stainless steel, magnesium alloy, titanium alloy, zinc alloy, nickel alloy, copper, steel, and so on.

aluminum alloy parts

brass parts

stainless steel parts

titanium alloy parts