Precision Zirconia Ceramic Parts High Temperature Stirring Rod

Gentle handling of advanced ceramic parts is practiced throughout the shop. When the parts are green, they are soft and can break like chalk. Once fired, they are extremely brittle. They chip and mark easily. The firing process stresses the material because the outer surface acquires a "skin." That skin reacts differently than the inner material. During grinding, the grain on the inside of a post-fired part is exposed, and the part can warp out of tolerance once it’s taken off the fixture.

We made a conscious effort to develop a deep specialty in diamond grinding because that’s the area where we could provide a value-added service to our customers

Industrial Ceramic Intriduction

Aluminium Oxide, Al2O3 is the most widely applied and cost effective technical ceramic material. It offers a combination of superior mechanical strength and electrical properties, wear resistance and corrosion resistance. The maximum working temperature is up to 1700 °C with relatively high thermal conductivity. It is also an electrically insulating material with a high electrical resistivity. The good corrosion resistance makes it insoluble in water and slightly soluble in strong acid and alkaline solution.

Company Introduction
Mingrui ceramic manufacture and provides alumina ceramic components for a wide range of application like Mechanical Equipment, Electronic & Electrical, Oil Drilling, Medical, Chemical Industry etc. According to actual application and customer's requirement, the purities vary from 95%-99.7% and the forming methods will be different. The forming methods applied in our plant include dry pressing, isostatic pressing, injection moulding, extrusion moulding. With experienced engineers and talented workers, we are confident to offer high quality, high precision, complex components for customers worldwide.

Product Description

Precision Ceramics has years of experience designing and developing technical ceramic solutions for a wide variety of applications and industries. Precision Zirconia Ceramic Parts High Temperature Stirring Rod. We offer this expertise to all of our customers to ensure the best design and materials are chosen for their specific application and needs. Precision Zirconia Ceramic Parts High Temperature Stirring Rod, Typically, our custom technical ceramic components and parts we supply are used for one of three main reasons:

Precision Zirconia Ceramic Parts High Temperature Stirring Rod
High temperature ceramics – crucibles, nozzles, lasers, furnace/kiln fixtures
Precision Zirconia Ceramic Parts High Temperature Stirring Rod
Wear and corrosion resistant ceramics – plates, housings, gages, caps/lids
Precision Zirconia Ceramic Parts High Temperature Stirring Rod
Electrical insulation ceramics – contact blocks, standoffs, fasteners, spacers

Precision Zirconia Ceramic Parts High Temperature Stirring Rod

Precision Ceramics is one of the world’s premiere technical ceramic suppliers – contact us to see what technical ceramics we can create for you.

Precision Zirconia Ceramic Parts High Temperature Stirring Rod

FAQ

Q: Are you trading company or manufacturer ?

A: We are factory.

Q: How long is your delivery time?

A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.

Q: Do you provide samples ? is it free or extra ?

A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q: What is your terms of payment ?

A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.

If you have any other question, pls feel free to contact us .