Product Introduction:
V-1100 is a practical Vis, single-beam optical system, widely used in teaching, chemical, electric power and other innovative designs.
Specifications:
Wavelength Range | 325~1000nm |
Band Width | 4nm |
Wavelength Accuracy | ±2.0nm |
Wavelength Repeatability | 1nm |
Photometric Accuracy | ±0.5% τ |
Photometric Repeatability | 0.2% τ |
Stray Light | ≤0.05% τ (340nm NaNO2) |
Stability | 0.001A/30min@500nm |
Photometric Mode | T,A,C,E |
Wavelength Setting | Manual |
Photometric Display Range | -0.3~3A |
Display Mode | 4 LED display |
Detector | Import Silicon Photodiode |
Light Source | Import Tungsten Lamp |
Power Requirement | AC 220V/50Hz 110V/60Hz |
Power | 120W |
Dimensions(W*D*H) | 360*280*190mm |
Weight | 9Kg |
Applications:
Drug analysis: National Formulary" Available UV-visible spectrophotometry drugs for drug testing, drug analysis, pharmaceutical and other industries
Life Sciences: DNA, protein concentration
Animal husbandry and fishery: Pesticide residues, crop composition testing, veterinary testing, feed testing, fertilizer testing, soil composition testing, testing and other aquaculture
Metal elements: Ag Cu Pb Zn Co Ni K Na Ca Mg Li Mn Cr As, including precious metals
Geological Survey: Determination of metal elements in minerals and inorganic salts
Food safety: Content of additives, preservatives, perfumes, fats, enzymes, sugars, spices, minerals, vitamins, etc.
Environmental monitoring: Monitoring water, air, rainfall and soil, etc., in which the determination of various pollutants
The Factory:
Our company:
FAQ:
1. Are you a factory or a trading company? 4. Why the reading is red and reach its maximum value 3.00Abs? Probably you use the glass cuvette in UV range. 5. Why the wavelength calibration or self checking fail? The deuterium lamp is turned off or there is something wrong with the D2 lamp, like the fuse, triode or the lamp itself. 6. Why is the reading is not as accurate as before? Do the wavelength calibration before testing or restore the device to its default factory settings. |