CONFIGURATION

PARAMETERS

TECHNICAL DATA

BASIC DATE

Materials: PE,PP,PVC,PS,PC,EVA, etc;

Capacity: 120L(MAX);

Output(dry cycle): pc/h≈260;

Total power: 108KW;

Average energy consumption: 51KW;

EXTRUSION UNIT

Screw mode: Gradually changed screw with same distance and different deep;

Diameter of screw:φ1000mm,L/D:24/1;

Material of screw: High quality nitriding steel 38CrMoAlA,with nitriding surface HV≥800,brittleness≤2;

Material of barrel: High quality nitriding steel 38CrMoAlA,with nitriding surface HV≥900,brittleness≤2;

Drive mode: Japanese TOSHIBA converter instrument + Hard gear surface decelerator;

Drive power: 45KW;

Plasticizing capacity: 140Kg/hr;

Temperature controlling: Adopt automatic temperature control model such as Japan Mitsubishi. Temperature controlling precision: Various ±1%;

Mode of heating: Cast-aluminum heater with heater preserving and protecting cover of stainless steel;

Heating power: 25.1KW;

Zones of heating: 5 zones;

Mode of cold: Automatic blowing, three blowers. Power: 90W×5;

ACCUMULATOR HEAD SYSTEM

Mode of general constructions: accumulator head;

Mode of heating: Adopting ceramic heaters;

Temperature controlling precision: Various in ±1℃;

Heating power: 26KW;

Temperature control: Adopting Japan Omron automatic temperature control module;

Temperature controlling precision: Various in ±1%;

Max annular diameter: ф450mm;

CLAMPING UNIT

Single station with high-precision guide and large arm cylinder axle;

Clamping force: 360 KN;

Platen opening stroke: 350~1200mm;

Platen size: 1020×1060mm;

Max mould size(W×H):780×1260mm;

Mould thickness: 360~600mm;

BLOWING SYSTEM

Bottom blowing system & expander are equipped;

HYDRAULIC SYSTEM

The whole hydraulic system adopts Japanese YUKEN components and proportional controlling circle;

Import hydraulic valve, seal and proportional control;

ELECTRONIC CONTROLLING

U.S.A. AMERSON PLC + Taiwan HITECH LCD monitor + MITSUBISHI Automatic temperature control model + other electronic parts, such as LG,OMORON,etc;

ENERGY EQUIPMENT

Compress air:Pressure: 0.8Mpa,currency: 0.8m3/min;

Cold water required:Pressure: 0.2～0.3Mpa,currency: 300L/min;

ELECTRIC SOURCES according to the voltage condition in your factory;

MACHINE DEMENSION (L×W×H): 6.2×2.8×5.4(m);

TOTAL WEIGHT 14T

PAYMENT TERMS