XF51 Radial Circular PMC

Specification sheet

USAGE AND PRECAUTIONS

USAGE METHOD

1. Place the workpiece on the working table of the suction cup, and then insert the Sakamoto into the shaft hole to suck the workpiece for processing

2. In order to prevent any possible accidental rotation of the wrench under magnetization, remove the wrench before processing

3. After the workpiece is processed, insert the wrench into the shaft hole an

n it 180 to "off" anticlockwise to remove the workpiece safely.

MAINTENANCE

1. Clean the surface of electromagnetic suction cup before use to avoid rabbit scratch

2. Do not knock or knock seriously to avoid damaging the disk and affecting the suction and accuracy.3. After use, it should be wiped and coated with antirust oil to prevent rust

PRECAUTIONS AND METHODS FOR USE OF SUCTION CUP

1. When the workpiece is placed, the magnetic pole should be occupied as much as possible to obtain greater attraction rather than aligning the broken pole

2. For workpieces with large area and irregular bottom shape, multiple suction cups can be used together3. For workpieces with large area and flat bottom, the auxiliary block can be used to pad the height to complete the clamping

4. For horizontal milling or drilling machine, it can cooperate with tripod side suction cup to complete clamping

5. For smaller workpieces, multiple workpieces can be clamped at one time to improve work efficiency(please select auxiliary block for workrkpieces placed in the (outermost place because the workpieces are too small)

6.in order to ensure the parallelism between the plane of the suction cup and the working surface of the machine tool, after the suction cup is installed in place, the user can clean and mill the working surface of the suction cup

7. Super strong suction cup is a set of magnetic clamping tools, which is composed of magnetic suction cup body and other optional accessories. The accessories should be used as much as possible to realize precise and rapid clamping. For small workpieces, auxiliary blocks should be selected properly