XH42 rotary permanent magnetic chuck

Machining center sucker in the course of the work does not require electricity, rely on permanent magnet suction suction workpieces, to avoid the electromagnetic system in the sudden power failure and damage to the magnetic loss of the workpiece and the risk of falling off the workpiece. As the permanent magnet sucker only in the magnetization and demagnetization process within 1-2 seconds of the use of electricity, work without the use of any energy and produce safe, strong and efficient force, both economic and environmentally friendly.

This new type of CNC machining center disk in the instant power after the permanent magnet can be hardened workpiece positioning processing, the application of reverse current, you can demolish the workpiece removed, safe and energy saving, easy to operate, no temperature rise and change, processing accuracy high.

Strong support. In theory, the unit of permanent magnet fixture clamping force of 150KN, far greater than the cutting force, even the uneven surface of the fur, but also safe to suck, even if the milling quality of 52HRC hardened hardened workpiece, the same can normal work.

Specification sheet

USAGE METHOD

1. Wipe the bottom surface of the suction cup and gently place it on the workbench of the machine tool withthe nameplate facing out, and then fasten the base with the bolt pressing plate

2. Check or repair the parallelism of the working face of the suction cup to the working surface of themachine tool

3. Place the workpiece on the working surface of the suction cup, and then insert the wrench into the shaft hole and turn it 180 degrees clockwise to align the red mark with "on" to suck the workpiece for processing.4. After the workpiece iS processed, insert the wrench into the shaft hole and turn it 180 degrees anti clock wise to align the red mark with "off' to remove the workpiece.

MATTERS NEEDING ATTENTION

1. It is strictly prohibited to knock and scratch, and the surface shall be cleaned before use to avoid affecting the accuracy.

2. Use ambient temperature -40 'C ~ 50 'C to prevent magnetic force reduction

3. After use, the working surface shall be coated with antirust oil to prevent rust.

4. Please pay attention to the safety when processing, pay attention to the speed and the cutting amount(grinding amount) when processing hard materials, so as to prevent the workpiece from flying out.

FAQ

Q: Are you manufactory or trade company.

A: We are both factory and trade company, we have lots of Cooperation factory with different quality and prices, just tell us your need, there is always a product suitable for you.

Q: Where do you located:

A: JYC technology Co.,Ltd. located at Wuxi City, Jiangsu Province, 1 hour by fast rail way to Shanghai City.

Q: Production time:
A: Normally,We'll have regular items in stock, customized products will take 7-14 work days.

Q: Payment term:

A: TT, credit card, L/C, Western Union, Paypal and so on, we accept all kinds of payment.

Q: What's your work time:

A: Normally, our work time is 9: 00 AM to 17: 00 PM Beijing time, but if you have emergency, Please contact us freely at any time. Our salesman will sulove your problem as soon as possible.