Vertical Single Stage Motor Water Pipe Inline Hot Water Booster Circulation Pump

1.Product Description

ISG series pump is single-stage , single-suction centrifugal pump , designed as per the interational standard ISO2858 . It is a replacement of type BA water pump which is applicable to industrial and urban water supply and discharge as well as the agriculture irrigation . It can be used to transport liquid which have physical and chemical properties similar to clean water with a temperature not exceeding 80°C. IHG type motor drive chemical pump designed for transferingchemical liquid, oil, petrochemical industry, metallurgy, light industry, printing dyeing, pharmaceutics, environment protect, seawater desalt, paper making, food and etc .industrial departments to transport corrosive medium without suspended grain or medium.

2.Pump Technical Parameters

1. Flow:0-1800m3/h;
2. Head:0-150m;
3. Power:0.75-250kw;
4. Rotary speed:1450rpm,1750rpm,2900rpm,3500rpm
5.. Temperature:-15-120°C.

3.Partial Models Specifications for Clients Choosing(More Model Information Pls Feel Free To Contact Us)

4.Pump Structure

1. pump body 2. impeller 3. impeller nut 4. bleeder valve 5. plug 6. pump cover 7. mechanical seal 8. Retaining ring 9. electric motor

5.Pump Features

1. Easy to mount. Because the inlet and outlet is located on the same central line, the pump can be directly mounted on any part of the pipeline just as a valve. Covered with a rain-proof cap, it can be operated outdoors.

2. Impeller mounted directly on the long axis of the motor, pump and motor bearing arrangement is reasonable, pump operation can effectively balance the radial and axial loads, thus ensuring the smooth operation of the pump, small vibration and low noise.

3. Mechanical shaft seal, use of imported titanium alloy seal ring, medium and high temperature mechanical seal with carbide materials, anti-wearing no leakage.

4. Easy installation and maintenance, no need to open pipeline system, the rotation parts of the pump can be pulled out by removing the screws on the pump.

5. According to the needs of flow and head, the pump can be used in series or parallel operation mode.

Features:

1. Conforms to the requirements of JB/T53058-93,adopts the performance parameters of IS centrifugal pump,vertical type in structure.
2. Advanced hydraulic models of high efficiency,with features of smooth operation,no leakage and low noise.
3. Updated and unique structure,requires smaller space for installation,save 40%~60% investment on site construction.
4. The pump shaft and motor shaft are 100% aligned;impeller is strictly static and dynamic balance tested,ensures no abnormal vibration in the high speed operation.
5. Maintenance free mechanical seal and shaft which made from titanium and tungsten carbide,with good sealing performance; Non-breakdown operation and long life.
6. With as many as 219 specifications,GFL series is the ideal product to replace old ISG series vertical centrifugal pump.

Structure:

1. Vertical structure,100% aligned shaft enables smooth operation and low noise.
2. Impeller is directly assembled onto the end of lengthened shaft of motor,thus reduced the pump dimension.
3. Pump inlet and outlet flanges share the same dimension and horizontally in a straight line; Pump is directly installed in the pipeline,which brings convenience for the pipe arrangement.
4. Surface chromed shaft prolongs the life for itself.
5. Canceled the traditional shaft sealing,eliminated the possibility of leakage.
6. Based on the requirements,it can be operated by series connection and parallel connection.
7. Can be vertically and horizontally installed according to the requirements of pipe arrangement.