CZF Self Priming Centrifugal Pump Non-Leakage PTFE Lined Magnetic Centrifugal Pump

Magnetic Centrifugal Pump introduction:

CZF self priming centrifugal pump non-leakage PTFE lined magnetic pump

1. Pump body is made of suction liquid cavity, liquid storage cavity, volute, reflowing hole, gas-liquid separation cavity, etc.

2. Pump body is made of cast iron lined with fluoroplastics(PTFE, FEP, PFA), inner rotor, pump cover, impeller, spacer sleeve, etc wet parts are made of alloy lined with fluoroplastics(PTFE, FEP, PFA).

3. Shaft sleeve, sliding bearing made by wearable carborundum, graphite, teflon, etc material. And with the lubrication groove, it could help to extend the service life of pump.

4. Closed static seal solved the leakage problem of liquid. Air & liquid mixed self priming type design, pump is with good self priming ability, the self suction height could be reach to 4m.

SPECIFICATION PARAMETER

PTFE Lined Magnetic Pump Performance range:

Flow rate: 2~120m3/h

Designed pressure: 1.6Mpa

Head: 12~80m

Power: 1.1~55kw

Allowed liquid temperature: -20°c ~120°c

Customized device: temperature monitor device, anti-idle device, leakage monitoring device.

Noted: If liquid density bigger than 1.3mg/cm3, pls note it for ref. Free-load running is forbidden. Can't use to transfer liquid with solids or crystal.

CZF Self Priming Centrifugal Pump Application range:

Wide used to transfer flammable & combustible & volatile high temperature alkali, acid, organic solvent, precious liquids, etc for petrochemical engineering, chemical fertilizer industry, alkali manufacturing, steelmaking, tombarthite, pesticide, dyestuff, medicine, paper-making industry, electroplating, electrolysis, scientific research institution, national defence industry, etc.