Magnetic oil level gauge turning for tank

Product features

1. Simple structure, good stability and reliability.

2. Does not depend on the physical and chemical state of the medium, such as electrical conductivity, dielectric constant, foam, and the like.

3. Suitable for corrosive, toxic, explosive and other media environments.

4. Interface measurement or level measurement of two media with different densities.

5. Two-wire 4~20mADC signal output, 0.8-inch or 0.56-inch LED digital display.

Product Parameters

Principle of The Remote Magnetic Flap Level Gauge
Because the remote magnetic flap level gauge is composed of a magnetic flap level gauge and a reed remote transmitter, combining the two components of the magnetic flap level gauge &1 introduces the working principle of the magnetic flap level gauge. The basic type of magnetic flap level gauge is a magnetic flap level gauge, also known as a magnetic float level gauge. Based on the structure of the connector, the principle of buoyancy and the magnetic coupling characteristics, real-time measurement of the liquid level is realized. When the liquid level in the measured container rises or falls, the magnetic float used to sense the change of the liquid level in the main measuring tube will also rise or fall. The permanent magnet steel in the float drives the magnetic flap outside the main measuring tube to flip 180&; 180 flux magnetic coupling; the two sides of the valve are painted with different colors (usually red and white) to indicate the position of the liquid level. When the liquid level in the container rises, the valve changes from white to red. When the liquid level in the container drops, the valve changes from red to white. The red and white junction of the indicator is the actual height of the liquid level in the container, so as to realize the accurate measurement and local display of the liquid level.