Green Yellow Orange Single Port Rj45 Connector With Magnetics 1000 Base - T
1. GLGNET Supports to Custom Different Magnetic RJ45 Connector According to Customer's Requirements;
- Supports to custom different Dimensions, Port, Rows, Latchs, Materials and so on;
- Operating Temp. Can be 0 ~ 70 ℃ or -45 ~ 80 ℃ ;
- Contact Finish can be with 6u", 15u", 30u", 50u" gold plating;
- Supports to custom different Pin Length;
- Support to be with or without LED diode,
- Supports to be with or without EMT TAB ( EMI Spring , EMI Finger );
- LED color can be green, yellow, orange, red and so on;
- Supports to be with or without lightpipes;
- Latch Up Or Down
2. Features
- Broad set of configurations
- Supports 10/100Base-T, 1000Base-T, 2.5GBase-T, or 5GBase-T
- Supports PoE and PoE+ (10/100Base-T)
- Compatible with surface-mount with paste-in-hole (PIH) technology
- -40°C to +85°C or 0°C to +70°C operating temperature range
- Combinations of green, yellow, orange, and red LEDs
- Complies with requirements of IEEE 802.3u standards
- RJ45 connector with 10 / 100 / 1000 BASE-TX magnetic
- Design for 10 / 100 / 1000 BASE transmission over UTP-5 cable
- Comply with RoHS requirements
3. Product Parameters
Applications | 1000 Base - T |
Configuration RX | T,C |
Configuration TX | T,C |
Contact Mating Area Plating | 6u", 15u", 30u", 50u" Gold Plating |
Cores per Port | 8 |
Diodes | Can be with or without Without DIODES |
LED Option | Can be with or Without LED |
Shielding | With shielding Shell, Magnetics |
Mounting Type | Through Hole |
Orientation | 90° Angle (Right) |
Latch | Up |
Number of Ports | 1 X 1 Single Port |
RoHS Compliant | YES-RoHS-5 WITH LEAD IN SOLDER EXEMPTION |
Search | YES |
Shield EMI Tabs | WITH |
Speed | 10 / 100 / 1000 BASE-T |
Operating Temperature | 0 TO 70 ℃ or -40 TO 85 ℃ |
Storage Temperature | -40 TO 85℃ |
Turns Ratio RX | 1CT:1CT |
Turns Ratio TX | 1CT:1CT |
4. Electrical Specification
Parameter | Specification |
Brand | GLGNET |
Operating Temperature | 0℃ to 70 ℃ |
Turns Ratio | 1:1±2% |
Open Circuit Inductance (ocl) | 350uH MIN@ 100KHz/100mV with 8Ma DC Bias |
Insertion Loss (IL) | -1.0dB MAX @ 0.3MHz – 100MHZ; |
Return Loss (RL) Z out = 100 OHM | -18dB MIN @ 1MHz – 30MHZ; -13dB MIN @ 30MHz – 60MHZ; -10dB MIN @ 60MHz – 100MHZ; |
Crosstalk Adjacent Channels | -30dB MIN @ 1MHz – 100MHZ |
Common Mode Rejection Ratio (CMRR) | -30dB MIN @ 1MHz – 100MHZ |
DC Resistance Imbalance | 0.1A MAXIMUM @ 48VDC ( Continuous ) |
HI - POT | 2250 VDC @ 60 Seconds |
5. Materials
- Housing: Class Filled PBT UL94V-0 (ROHS)
- Contact: Phosphor Bronze, 50-100 Microinches Min, Overall Ductile Nickel Underplate with selected 30 Microinches Gold At Mating Interface;
- Shield: 0.2mm Thickness With Brass
- Jack Cavity Conforms to FCC rules and regulations part 68 subpart F
- The Part is recommended for wave soldering process peak soldering temperature is 260 ℃ MAX. 10 Seconds Max;
- Operating Temperature: 0 ℃ to +70 ℃, Storage Temperature : -40 ℃ to +85 ℃
6. Applications
Equipment utilizing a network port
- NICs
- Servers
- PCs
- Consumer Devices
Networking equipment
- Hubs
- Switches
- Routers
- PCs
- Servers
- Workstations
- Motherboards
7. GLGNET Advantage
- 20 years experiences in Magnetic RJ45 Connectors
- 1500 Employees
- 58 R&D Engineers.
- 22000 square meters Factory
- Our products are compliant with RoHS, REACH and UL certification
- Long term Corporation with HUAWEI, ZTE, FOXCONN, XIAOMI, TCL and so on
- 20KK Prots / Month Capacity
- ISO9001, ISO14001, QC080000, OHSAS18001, and IECC international management system certification
8. Mechnical Drawing
