NLOS Long Range Wireless Digital Video Transmitter For Remotely Operation
Description
The FDM-615PTM is an advanced wireless communication module leveraging Frequency Hopping Spread Spectrum (FHSS) technology for superior immunity to noise and interference. It delivers reliable, long-distance, full-duplex Ethernet/serial communication in a compact and robust form factor, making it ideal for micro unmanned platforms.
Real-Time Video and Data
Delivers stable, high-quality video and bi-directional data transmission for remote control and monitoring.
High Power and Small Size
Offers a unique combination of 10W transmitting power and a compact design, ensuring robust performance in constrained environments.
Enhanced NLOS Capability
Maintains stable communication in challenging environments, including dense forests and urban settings.
Key Features
|
Key Features:
Robust Long-Range Communication
Offers clear and stable NLOS video transmission with a range of 1-10 km for ground-to-ground applications.
High-Definition Video Transmission
Supports real-time HD 1080P60 video streaming at data rates of 8-12 Mbps over distances of 1-10 km.
Short Latency
Features ultra-low latency of 60ms to 80ms, ensuring seamless control and real-time video monitoring.
Multi-Frequency Operation
Operates in UHF, L Band, and S Band, with frequency options including 800MHz and 1.4GHz.
Utilizes Automatic Frequency Hopping Spread Spectrum (FHSS) for optimal channel selection and interference avoidance.
Application
Utilizing the network characteristics of large bandwidth and low latency, real-time high-definition video and other sensor data are transmitted back to the control center in real time for operators to perform remote operations based on on-site conditions.
Specification
GENERAL | ||
Technology | Wireless based on TD-LTE Technology Standards | |
Encryption | ZUC/SNOW3G/AES(128) OptionalLayer-2 | |
Data Rate | 30Mbps(Uplink and Downlink) | |
Range | 100km-150km(air to ground) | |
Capacity | 32Nodes | |
NLOS Range | 5-10km nlos ground to ground | |
RF Power | 10Watts | |
Latency | End to End: 60ms-80ms | |
Modulation | QPSK, 16QAM, 64QAM | |
Anti-jamming | Automatically frequency hopping | |
Bandwidth | 1.4Mhz/3Mhz/5Mhz/10MHz/20MHz |
SENSITIVITY | ||
2.4GHZ | 20MHZ | -99dBm |
10MHZ | -103dBm | |
5MHZ | -104dBm | |
3MHZ | -106dBm | |
1.4GHZ | 20MHZ | -100dBm |
10MHZ | -103dBm | |
5MHZ | -104dBm | |
3MHZ | -106dBm | |
800MHZ | 20MHZ | -100dBm |
10MHZ | -103dBm | |
5MHZ | -104dBm | |
3MHZ | -106dBm |
FREQUENCY BAND | ||
2.4Ghz | 2401.5-2481.5 MHz | |
1.4Ghz | 1427.9-1447.9MHz | |
800Mhz | 806-826 MHz |
POWER | ||
Power Input | DC 24V+-10% | |
Power Consumption | 30watts |
COMUART | ||
Electrical Level | 2.85V voltage domain and compatible with 3V/3.3V level | |
Control Data | TTL mode | |
Baud rate | 115200bps | |
Transmission Mode | Pass-through mode | |
Priority level | l Higher priority than the network port. When the signal transmission is crowed, the control data will be transmitted in priority | |
Note:l The data transmitting and receiving is broadcast in the network. After successful networking, each FDM-615PTM node can receive serial data.l If you want to distinguish between sending, receiving and control, you need to define the format yourself |
INTERFACES | ||
RF | 2 x SMA | |
Ethernet | 1xJ30 | |
COMUART | 1xJ30 | |
Power | 1xJ30 | |
Debug | 1xJ30 |