IP MESH Module For UAV 30km Multiple Video Streams And Telemetry Data
Description
The FD-7802MT is an advanced wireless communication solution developed by IWAVE, designed to provide reliable IP transparent transmission for a variety of upper-layer applications, including video streaming, data transfer, and voice communication. This versatile device adopts a MESH networking mode, enabling dynamic routing, multi-hop relay, and seamless connectivity in complex environments.
FD-7802MT support 100Mbps transmission data rate,it special designed for multiple cameras on one drone,Its high bandwidth(100Mbps) can support multiple video streams to be transmitted to the control ground station at the same time.
Features
Flexible Deployment: Enables quick network creation with high compatibility, low power consumption, and high bandwidth, ensuring fast deployment in a variety of challenging environments.
Multi-Hop Connectivity: Supports multi-hop relay, making it ideal for extended communication ranges in large or obstructed areas.
In addition to supporting MIMO mode, FD-7802MT also uses LTE-A's CA technology (Carrier aggregation). FD-7802MT supports dual carriers and can support a maximum operating bandwidth of 40MHz: 2X20MHz.
Compared with MIMO mode, CA mode has no restrictions on the installation location and spacing distance of device antennas, making deployment more flexible and easier to achieve high-bandwidth data transmission.
This robust digital data link provides a robust and secure link in the 600 MHz and 1.4G frequency band
J30 Aviation Plug Interface: The FD-7802MT features a robust J30 aviation plug interface, ensuring durability and ease of connection.
Multiple Communication Options: Supports both Ethernet and serial port communication, providing flexibility for integration with various devices.
Wired Ethernet Access: Offers reliable Ethernet connectivity for stable, high-speed data transmission and control.
Application
Video and Data Transmission: Perfect for environments where real-time video, data, and voice transmission is critical, such as in security, defense, and public safety.
Non-Line-of-Sight Environments: Reliable communication in complex, NLOS conditions such as urban areas, forests, and mountainous regions.
Rapid Deployment: Ideal for tactical communication systems, robotics, and autonomous vehicles that require quick setup and reliable performance in diverse settings.
Dynamic Networking: The two-layer dynamic protocol ensures adaptive performance in challenging wireless environments.
Seamless Integration: IP transparent transmission simplifies the connection of video, data, and voice applications.
High Compatibility: Plug-and-play setup reduces deployment time and complexity, with no manual configuration required.
Versatile Communication: The J30 aviation plug interface and support for both serial and Ethernet communication make it suitable for a wide range of industrial, tactical, and mobile applications.
Specification
GENERAL |
WIRELESS |
|||
Technology |
Wireless based on TD-LTE Technology Standards |
Communication |
1T1R 1T2R 2T2R |
|
Video Transmission |
1080p HD video transmission, H.264/H.265 adaptive |
IP Data transmission |
Supports data transmission based on IP packets |
|
Eencryption |
ZUC/SNOW3G/AES(128) Optional Layer-2 |
Data Link |
Full duplex communication |
|
Data Rate |
Max 100Mbps(Uplink and Downlink) |
Up & Down Ratio |
2D3U/3D2U/4D1U/1D4U |
|
Range |
UGV: 5-10KM Ground to ground(LOS) UGV: 1-3KM Ground to ground(NLOS) |
Automatic Reconstruction Chain |
Automatic link re-establishment after link failure/ re-deploy the network after a link failure |
|
Capacity |
64nodes |
SENSITIVITY |
||
MIMO |
2x2 MIMO |
1.4GHZ |
20MHZ |
-102dBm |
Transmitting Power |
2watts |
10MHZ |
-100dBm |
|
Latency |
Air interface delay<30ms |
5MHZ |
-96dBm |
|
Modulation |
QPSK, 16QAM, 64QAM |
600MHZ |
20MHZ |
-102dBm |
Anti-Jamming |
Frequency Hopping and Adaptive Modulation |
10MHZ |
-100dBm |
|
Bandwidth |
1.4Mhz/3Mhz/5Mhz/10MHz/20MHz/40Mhz |
5MHZ |
-96dBm |
|
Power Consumption |
30Watts |
FREQUENCY OPTION |
||
Power Input |
DC24V-DC27V |
1.4Ghz |
1420Mhz-1530MHz |
|
Dimension |
130*100*25mm(Antenna Not Included) |
600Mhz |
566Mhz-678Mhz |
MECHANICAL |
||
Working Temperture |
-20℃~+55℃ |
|
Dimension |
130*100*25mm(Antenna Not Included) |
|
Weight |
273g |
|
INTERFACES |
||
RF |
2 x SMA |
|
ETHERNET |
1xEthernet |
|
COMUART |
3xSerial Port |
1. DEBUG Serial Port 2. Base Serial Port (only support TCP/UDP) 3. Extend Serial Port |
POWER |
1xDC INPUT |
DC24V-27V |