100Mbps Wireless Point To Multi-Points Transceiver For HD Video And Data Communication
Description
FDM-6802PTM is a wireless transmission product designed by IWAVE based on mature SOC chipset, 2watts power, 2X2 MIMO. Provide wireless communication link of HD video, data and serial control data based on IP. FDM-6802PTM is designed based on CA (Carrier Aggregation), MIMO technologies. It doesn't rely on any carrier's base station. This digital data link provides a robust and secure link in the 600 MHz and 1.4G frequency band Supports Ethernet and full duplex telemetry data transmission. Anti-jamming: It adopts the Automatic frequency hopping technology(FHSS) and adaptive modulation for anti-interference. Builds a point to point and point to multiple point network with 64nodes.
Key Features
|
Technology Advantage
FDM-6802PTM adopts carrier aggregation technology CA technology, which can aggregate two 20MHz bandwidth carriers together to achieve 40MHz wireless carrier bandwidth, effectively improving the uplink and downlink transmission rates, and enhancing the robustness and environmental adaptability of the entire wireless transmission system.
1. Supports a larger total bandwidth, supports 20MHz+20MHz carrier aggregation, and the data transmission peak rate exceeds 100Mbps.
2. Supports continuous carrier aggregation and non-continuous carrier aggregation, which is more flexible.
3. Supports carrier aggregation of different bandwidths, and can adjust the bandwidth of carrier aggregation
according to environmental interference and available spectrum resources, making it easier to adapt to different scenarios.
4. Retransmit on different carriers to avoid data interruption after a single carrier is interfered.
5. Supports frequency hopping of different carriers to more effectively find interference-free carriers.
Why Choose FDM-6802PTM?
High Bandwidth: Efficiently handles video and data communication with low latency.
Anti-Interference: Advanced FHSS and adaptive modulation ensure uninterrupted operation in challenging RF environments.
Plug-and-Play: Simplifies deployment with automatic configuration and dynamic networking.
Durable and Flexible: The J30 aviation plug interface and multiple communication options make it suitable for various rugged applications.
The FDM-6802PTM is an ideal solution for industries requiring a reliable, adaptable, and high-performance wireless transmission system for critical video and data communication tasks.
Command Interface |
AT command configuration |
API/HTTP/UART for AT command configuration |
Configuration Management |
Support configuration via WEBUI, API, and management software |
|
Working Mode |
TCP server mode |
lWhen set as a TCP server, the serial port server waits for computer connection.
lWhen set as a TCP client, the serial port server actively initiates a connection to the network server specified by the destination IP.
lTCP server, TCP client, UDP, UDP multicast, TCP server/client coexistence, MQTT
|
Baud rate |
1200, 2400, 4800, 7200, 9600, 14400, 19200, 28800, 38400, 57600, 76800, 115200, 230400, 460800 |
|
Protocol |
ETHERNET, IP, TCP, UDP, HTTP, ARP, ICMP, DHCP, DNS, MQTT, Modbus TCP, DLT/645, Pass-through mode |
|
System Management |
Supports WATCHDOG function, all system-level exceptions can be identified and automatically reset |
Specification
GENERAL |
WIRELESS |
|||
Technology |
Wireless based on TD-LTE Technology Standards |
Communication |
1T1R |
|
Video Transmission |
1080p HD video transmission, H.264/H.265 adaptive |
IP Data transmission |
Supports data transmission based on IP packets |
|
Eencryption |
ZUC/SNOW3G/AES(128) Optional Layer-2 |
Data Link |
Full duplex communication |
|
Data Rate |
Max 100Mbps(Uplink and Downlink) |
Up & Down Ratio |
2D3U/3D2U/4D1U/1D4U |
|
Range |
UGV: 5-10KM Ground to ground(LOS) |
Automatic Reconstruction Chain |
Automatic link re-establishment after link failure/ re-deploy the network after a link failure |
|
Capacity |
64nodes |
SENSITIVITY |
||
MIMO |
2x2 MIMO |
1.4GHZ |
20MHZ |
-102dBm |
Transmitting Power |
2watts |
10MHZ |
-100dBm |
|
Latency |
Air interface delay<30ms |
5MHZ |
-96dBm |
|
Modulation |
QPSK, 16QAM, 64QAM |
600MHZ |
20MHZ |
-102dBm |
Anti-Jamming |
Frequency Hopping and Adaptive Modulation |
10MHZ |
-100dBm |
|
Bandwidth |
1.4Mhz/3Mhz/5Mhz/10MHz/20MHz/40Mhz |
5MHZ |
-96dBm |
|
Power Consumption |
30Watts |
FREQUENCY OPTION |
||
Power Input |
DC24V-DC27V |
1.4Ghz |
1420Mhz-1530MHz |
|
Dimension |
86*120*24.2mm |
600Mhz |
634Mhz-674Mhz |
MECHANICAL |
||
Working Temperture |
-20℃~+55℃ |
|
Dimension |
130*100*25mm(Antenna Not Included) |
|
Weight |
273g |
|
INTERFACES |
||
RF |
2 x SMA |
|
ETHERNET |
1xEthernet |
|
COMUART |
3xSerial Port |
1. DEBUG Serial Port |
POWER |
1xDC INPUT |
DC24V-27V |