30km Ethernet TCPIP and UDP Flight Control Data and HD Drone Video Transmitter
Description
FDM-605PTM is long range point-to-point drone digital Ethernet data downlink radio base on TDD-COFDM wireless communication technology. It supports 1.4GHz (1420~1530MHz) and suitable for long distance, high code stream and wireless transmitting application. The transmitting rate up to be 30Mbps and the farthest transmission distance is 30km air to ground. This model has advantages of light weight, mini size, low power consumption, high stability and receiving sensitivity. It supports two-way TCPIP/UDP Ethernet data and duplex serial data transmission.
Key Features
| ![]() |
End to End Low Latency
● Latency from tx to rx less than 33ms.
● CABAC entropy encoding and high compression rate to guarantee high video quality at low bitrate
● Each frame is encoded to same size to ensure no additional latency in wireless channel caused by large I frame.
● Ultra fast decoding to display engine.
Long Range Communication
Advanced modulation, FEC alogrithm, high performance PA and ultra sensitive receiver RF module to keep a stable and long range wireless link between air unit to ground control station.
-40℃~+85℃ working temperature
All chips and electronic components are special designed with industrial grade tolerating -40℃~85℃
Various Ports
FDM-605PTM offers RJ45 and TTL bi-directional serial port and RS232 Port. This model can wireless transmit serial data and Ethernet data based on TCP/IP/UDP. SMA Port interface can directly connected Antennas or feeder cable.
Application
FDM-605PTM is an Ethernet bi-direction Drone Video Transmitter that provides robust video transmission for long distance.
It’s the ideal solution for Drones and Unmanned Aerial Vehicles (UAV), Unmanned Ground Vehicles (UGV), long-range wireless video and telemetry, critical and secure applications.
Specification
Frequency | 1.4GHz (1420-1530MHz) 800Mhz(806Mhz-826Mhz) |
RF Transmitting Power | 33dBm(air to ground 30-50km) |
Frequency Bandwidth | 1.4/3/5/10/208MHz |
Antenna | 1T2R |
Adjust bit rate | Software adjustment |
Encryption | AES128 |
Transmission Mode | point to point and Point to Multiple Point |
Start-up time | 25s |
Link rebuilt time | <1s |
Error Detection | LDPC FEC |
Serial Data | TTL: 0-3.3v |
RS232: ±13V | |
Ethernet | Support TCP/IP/UDP |
Transmission Rate | 30Mbps |
Sensitivity | -100dbm@4Mhz |
| -95dbm@8Mhz |
Antenna | 1T2R(Omni Antenna) |
Power | DC12V-30V |
Power Consumption | TX: 12Watts |
| RX: 12Watts |
Temperature | Operating temperature: -40 - +85°C |
Storage temperature: -55 - +85°C | |
Interface | Power input interface × 1 |
| Antenna interface × 1 |
| TTL Bidirectional Port × 2 |
| RS232 Interface x 1(TTL and RS232 can not be used at same time) |
| Ethernet Port x1 |
Indicator | Power indicator light |
Connection Status Indicator(4, 5, 6) | |
Signal Strength Indicator(1, 2, 3) | |
Metal Case Design | CNC technology |
Double aluminum alloy shell | |
Conductive anodizing craft | |
Size | 110*70*18mm |
Weight | TX: 150g |
Rx: 150g |