Fresh Meat Modified Atmosphere Packaging Machine For Manufacturing Plant
Modified Atmosphere Packaging Machine:
The RDL380P tray sealer is based on tried and tested technology. It is known for its performance and simplicity of use. This tray sealer model combines excellent seal integrity and pack presentation with flexibility, quick changeovers and user-friendly operation in a compact and hygienic design. It adopts CO2 ,O2,N2 and other protective mixed gases to replace the air in the packaging
Advantages:
1. The art of cutting the inner edge to enhance the brand value of the product
2. Simple operation, all with one click, all packaging can be completed
3. Low-voltage electrical appliances, mixing systems, start-up devices are using the global first-line brand
4. Advanced replacement technology, the residual oxygen content is stable below 0.5%.
5. Industrial design, the highest quality materials, carefully create each corner
6. Special multi-box sealing film cutter control system, to ensure that each box of packaging is beautiful
Explanation of each button on the running interface | |
Seal cylinder rise | Press the button, the upper mold will rise to the limit position, It can’t work with the ‘tray in’ ‘tray out’ at the same time. |
Seal cylinder down | Press on this button to drive the heating mold down to the original position. |
Push tray up | There are pop device to push the tray up after the lower mold out. |
Pressure holding cylinder | Press on this button to make the pressure holding cylinder motion. |
Inflate cylinder | Press on this button to make the mixture gas ejected from the gas filled holes. It can be used for ventilation before the first package. |
Inflatable cylinder | The operation steps required for filling the bottom, only for debugging |
Film feeding | Press on this button to drive the film automatic receiving, release to stop it. |
Bench-marking | Press on this button to convert to “By length” mode. |
Change gas for 5 seconds | Press on this button to change the gas for 5 seconds. |
Tray in | Press on this button to control the entry of the lower mold, make sure that ‘Pressure holding cylinder’, ‘Inflate cylinder’, ‘Push tray up’ and ‘Seal cylinder down’ are not pressed when you use this button. |
Tray out | Press on this button to control the exit of the lower mold, make sure that ‘Pressure holding cylinder’, ‘Inflate cylinder’, ‘Push tray up’ and ‘Seal cylinder down’ are not pressed when you use this button. |
Return | Press on this button to back on the menu. |
Function of the machine
Applications include
Factory images: