Single-Stage NR20/R Stator Rotor Assembly For Marine Turbocharger Repair

Features of NR20/R Marine Diesel Turbochargers:

• NR20/R Stator Rotor Assembly is one part of NR series supercharger.
• Its radial-flow turbocharger consists of single-stage radial-flow turbine and centrifugal compressor.
• NR turbochargers adopts inboard plain bearing, uncooled casings and lubricated by the engine's lube oil system.
• Max. of the compressor pressure ratio about 4.5;
• Suitable for a wide variety of fuels:heavy fuel, diesel oil, biofuel and gas
• Simple and durable design;
• Easy maintenance；
• Long service life；
• widely used in ship building, locomotive, land power station and petroleum drilling industries．

What is the dimension and weight for NR20/R Marine Diesel Turbochargers:

More picture for Single-Stage NR20/R Stator Rotor Assembly For Marine Turbocharger Repair:

What is NR20/R Stator Rotor Assembly For Marine Turbocharger Repair?

• The turbocharger rotor assembly / rotor complete consists of compressor impeller, blade shaf/turbine shaft/rotor shaft and partition wall complete.

• The turbocharger turbine shaft / rotor shaft is equipped with components such as a compressor and a turbine impeller, and has a complicated structure and a large weight.
• If the ship is parked for a long time, the turbocharger rotor will be bent and deformed due to the long-term non-operating self-weight, which will break the matching gap between the rotor and the casing, the gas seal and the casing, and the rotor will be lost.
• In severe cases, the rotor is difficult to rotate and the friction is severe.
• A large centrifugal force is generated during operation to cause the supercharger to vibrate.
• Therefore, if the ship is suspended for a long time, attention should be paid to the agement of the supercharger to prevent deformation of the rotor.

The definition of Marine Diesel Turbochargers?

The marine diesel turbocharger, also known as exhaust gas turbocharger, is the main equipment in the diesel engine boosting system. It consists of a single-stage exhaust gas turbine and a centrifugal compressor. They are mounted on the same shaft to form the moving part of the marine turbocharger/exhaust gas turbocharger - the rotor. The function of the marine turbocharger/exhaust gas turbocharger is to use the diesel exhaust energy to drive the turbine to drive the compressor on the coaxial to increase the air pressure into the cylinder, so that the diesel engine power is greatly improved. The exhaust turbocharger approximately doubles the power of the diesel engine, but its weight is only increased 10%.