Impa591214 Scaling Machines 220v Rustibus Model 400 Scaling Machine Used For Ship Deck

Large Area Electric Scaling Machines Rustibus 400 Chain Impact Type

Electric Scaling Machines

Rustibus Model 400

IMPA CODE: 591214

1.Developed for de-scaling along edges, smaller areas, and spot scaling surface.

2.The use and fast replacement of specially prepared chain links is the key to this quick and efficient surface treatment.

3.This machine uses a disposable chain drum system with specially prepared chain links that deliver 28,000 of blows per minute and this is the key to its quick and efficient method of surface preparation.

A needle gun rust remover, also known as a needle scraper or needle gun, is a pneumatic tool that uses a tiny chisel to rotate at high speed to quickly remove rust, old paint, and corrosion from hard metal. Perhaps best known for its association with the U.S. Navy and for cleaning old ships, needle gun rust removers have also been widely used in home and car repairs. Valuable for its ability to Pierce fast-moving "needles" into narrow places, and its popularity can be driven by a small piston that automatically adjusts its speed to 2500 times faster than a normal piston, the Needle Gun rust remover is manufactured by many power tool manufacturers. Most rust removers are operated with compressed air, but electric models are available. On average, they weigh less than five pounds.

The manufacturer recommends that any surface to be treated with a needle gun rust remover first be cleansed of oil from the surface when applied at a 90-degree Angle in a small area. Because the chisel is very fast and only needs to be moved a short distance, the needle gun remover can also form a nice edge along the edge of the surface. Variations between rust removers on the market are usually related to the number of needles and the speed at which they move. Cleaning forces can also wear out cheaper rust removers very quickly, so it is important to determine the number of tools that will be used. Also note that needle gun removers are not a quiet tool and some operators may choose to wear earplugs. It is also not recommended for use on softer surfaces, such as aluminum, wood, chromium, brass, linen, or stainless steel, as the needle may actually wash away the metal surface beneath rust and paint.