Single Use Ffp2 Face Mask With Elastic Strip Non Stimulating Perfect Fitting

Feature:

• Cup Mask use adjustable aluminum nose clip so it makes wearing more sealless leakage ,use latex-free elastic strap , soft nose liner so it make softer and fit the face .And use easy-breathing valve then it makes breathing more smooth .

  ★ Single-use

  ★ Without glass fibers

  ★ Very low resistance to breathing

  ★ Nose bar adaptable

  ★ High filtration capacity: filter penetration at least 94% of airborne particles.

  ★ Perfect fitting

  ★ CE; EN149:2001 certified.

  ★ Designed to protect the wearer from inhaling harmful dusts; fumes; vapors; and gases.

  ★ Respirators come in a wide range of types used by the military; private industry and the public.

Tech Standard & Specifications

FFP2 masks are one of the European mask standards EN149: 2001. They are used to adsorb harmful aerosols, including dust, fume, mist droplets, toxic gases and toxic vapors, and block them from being inhaled.

FFP1: Minimum filtering effect> 80%

FFP2: Minimum filtering effect> 94%

FFP3: Minimum filtering effect> 97%

The filter material of FFP2 mask is mainly divided into four layers, that is, two layers of non-woven fabric + one layer of solvent spray cloth + one layer of needle punched cotton.

How to use?

• Cup respirator in one hand with nosepiece at fingertips,allow headbands to hang freely below hand.
• Hold respirator under chin,with nose piece up
• Locate the upper strap across the crown of the head and the lower strap below the ears.
• Strap must not be twisted
• Using both hands,mould nose clip to the shape of the lower part of the nose to ensure a close fit and good seal.Pinching the nose clip using only one hand may result in less effective respirator peformance.
• The seal of the respirator on the face should be fit-checked before entering the workplace.
• If the user feels the bottom strap is too loose and it is not possible to achieve a satisfactory fit of the mask a knot can be tied in the strap.

​