Founded in 1998, MASUMA Auto Spare Parts Co., Ltd has grown into an 25-Year International enterprise with independent intellectual property rights, integrating R&D, manufacturing, sales and service. The headquarters is located in Tokyo, Japan. The global operation center and production base are established in China. Our care spare parts cover more than 90 series of car brands, including Japanese, Korean, European, American cars, etc. We have multiple storage centers around the world. Thus, we are able to deliver the goods in a short time.

Our quality control system has passed the professional certifications, including ISO-9001, ISO-14001, SGSIATF16949. We provide one of the lowest scrap rates in the industry: just 0.09%. At the same time, our goal is to offer car owners spare parts that last at least 15% longer than our competitors.

Following is the detailed introduction to our car spark plugs. If you want to know more information or have personal introduction, please send an online inquiry to us.

The spark plug, an important component of the gasoline engine ignition system, introduces high-voltage electricity into the combustion chamber and then skips the electrode gap to generate sparks, resulting in igniting the combustible mixture in the cylinder. It is mainly composed of terminal nut, insulator, terminal screw, center electrode, side electrode and shell. The side electrodes are welded to the housing.

On the one hand, the spark plug has to withstand the sharp temperature shock, pressure shock and chemical corrosion in the combustion chamber at all times. On the other hand, it also has to withstand at least 30,000 volts of ignition high-voltage pulses. Therefore, spark plugs are required need to have good mechanical, electrical and chemical properties throughout their life cycle.

MASUMA boasts of hundreds of spark plugs in six categories: Nickel Alloy, Single Platinum, Single Iridium, Double Platinum, Double Iridium and Iridium Platinum. The complete variety can be adapted to most of the world's mass-produced brand cars.

Copper core nickel alloy spark plugs

The nickel electrode head embedded in the copper core can greatly improve the heat dissipation performance of the spark plug and effectively prevent the engine from overheating.

Single platinum spark plugs

After starting, the self-cleaning temperature can be felt faster, helping to improve the stability of the electrode gap, avoiding engine flameout caused by excessive clearance or and carbon deposition and carbon deposition and power shortage caused by too small clearance.

Single iridium spark plugs

It improves ignition efficiency, making the acceleration it more powerful to accelerate, reducing fuel consumption, increasing power and extending service life.

Dual platinum spark plugs

It improves ignition and flashover properties, stabilizes it in the temperature range between self-cleaning and red-hot combustion, and has excellent durability and stability.

Double iridium spark plugs

It has better performance in terms of ignition ability, starting performance, acceleration performance, fuel economy and longevity.

Iridium platinum alloy spark plugs

With the advantages of significant ignition efficiency, excellent acceleration performance, reduced fuel use and strong power, platinum can better withstand the high temperature in the cylinder, and the heat dissipation, durability and stability performance have been are maximized.

With the 0.5mm tip electrode design, second-generation dual-iridium spark plug contributes to the rapid generation of flame cores. Therefore, the lower ignition voltage makes it more energy efficient.

1. Super acceleration performance: Under simulated conditions, namely 0-150KM/h acceleration, the time required for double iridium spark plugs is 0.7 seconds faster than platinum spark plugs and 0.5 seconds faster than iridium spark plugs.

2. Instant start: it facilitates the cold start of the car, provides greater efficiency in cold weather and cold regions, and reduces voltage amplitudes.

3. More fuel saving: The second-generation double iridium spark plug has the advantages of easier ignition, more complete combustion, higher energy conversion rate, less exhaust emissions, and more environmental friendly.

4.Super long life: When the engine ignites, the instantaneous temperature in the cylinder is as high as 1500℃ to 1800℃. The melting point of the second-generation double iridium is as high as 2454 °C. The product life can reach more than 100,000 kilometers.

A new generation of ceramic technology endows the ceramic parts of the dual iridium spark plug with high strength, making it resistant to the effects of turbo engine knocking.

1. Remove the dust around the terminal cap of the high-voltage wire, or use a high-pressure air gun to remove the dust and dirt around the spark plug to prevent the dust or dirt from falling into the combustion chamber or the outer gasket seat.

2. Pull out the high voltage connection cap by hand or auxiliary tool. Never unplug the high-voltage wire directly to prevent the high-voltage wire from separating from the contacts in the wiring cap.

3. Loosen the spark plug with the special sleeve. The sleeve must match the size of the hex face of the spark plug. Then, it can be gently unscrewed with fingers or with the help of a special rubber tube.

4. Gently screw the new spark plug into the cylinder head. It can be screwed in with a rubber tube or a magnetic sleeve if the mounting hole is deep. Do not throw the spark plug directly into the mounting hole to avoid damage to the ignition end.

5. Check whether the high-voltage terminal cap is aged or damaged. Then hand press the high voltage terminal cap vertically onto the spark plug until a click is heard. It is recommended to replace the spark plug, high voltage wire and ignition coil at the same time.

6. Tighten the spark plug to the recommended torque, or follow the installation instructions to an angle. The socket size must match the hex. The internal aperture should be large enough to avoid stressing applying too much stress to the ceramic.

Method 1: Match MASUMA products through MASUMA's query system or a third-party query platform.

Method 2: Input the dimensions of multiple parts of the physical product through MASUMA's query system for matching.

Method 3: Enter the original factory number or the world's major brand numbers through the table below to find MASUMA products.

MASUMA Spark Plug Code Interchange Table

Performance requirements for spark plugs

Mechanical behavior:

The ceramic and electrode materials of the spark plug should have sufficient mechanical strength to withstand the impact of the explosion pressure of 80 bar. At the same time, they are required to be able to withstand the alternating shock of inhaling gases as low as minus -40°C and combustion gas temperatures as high as 2500°C.

Electrical performance:

The ceramic of the spark plug is required to withstand at least 30KV ignition high voltage pulse impact without being broken down. And there should be no flashover creepage on the surface of the ceramic.

Chemical properties:

Ceramic and electrode materials are required to withstand chemical corrosion by combustion products (compounds of PbPS).

The choice of spark plug calorific value must match the engine. Improper matching of calorific value may occur in two situations: the melting of the ceramic or electrode after the spark plug is overheated, resulting in carbon deposition due to overcooling. As shown below:

Too high calorific value leads to carbon deposition

The calorific value is too low to cause overheating

When you choose a spark plug, in addition to confirming the thread specification and the size of the ignition end, you must also choose a spark plug with a suitable calorific value!

Carbon deposition resistance

The anti-carbon performance refers to the ability of the spark plug to resist the failure of carbon deposits under low temperature or low speed operating conditions (such as speed less than 40km/h).

It is usually tested by multiple repeated starts of the vehicle in low temperature conditions. The factors that affect the carbon deposition performance mainly include the following aspects:

A. Mixed gas concentration: It is determined by the ECU number. Under the conditions of low speed and small load, the mixed gas is too rich to form carbon deposits.

B. Driving habits: If the vehicle runs at low speed and low load for a long time, it will cause serious carbon deposition.

C. Fuel quality: Inferior fuel cannot be fully burned and easily forms carbon deposits.

D. Spark plug temperature: The spark plug will continue to produce carbon deposits when the operating temperature is below 500°C.

E. Spark plug skirt structure: Optimized ceramic skirt and top structure can effectively reduce carbon deposits.

Ceramic cracks, hexagonal damage.

Excessive torque can cause the thread to crack or break.

The washer is not deformed due to too little torque, and the electrode is overheated and fractured.

There is a corresponding specification for the installation sleeve of spark plugs, namely ISO 11168:95. It's worth noting that the original specification was for a spark plug hex minimum size of 16mm, which does not apply to 14mm spark plugs.

Therefore, it is recommended that the latter be designed with reference to the 16mm specification to avoid damage to the ceramic during installation.

Six Stepsfor Repair and Installation

1. Remove the dust around the terminal cap of the high-voltage wire, or use a high-pressure air gun to remove the dust and dirt around the spark plug to prevent the dust or dirt from falling into the combustion chamber or the outer gasket seat.

2. Pull out the high voltage connection cap by hand or auxiliary tool. Never unplug the high-voltage wire directly to prevent the high-voltage wire from separating from the contacts in the wiring cap.

3. Loosen the spark plug with the special sleeve. The sleeve must match the size of the hex face of the spark plug. Then, it can be gently unscrewed with fingers or with the help of a special rubber tube.

4. Gently screw the new spark plug into the cylinder head. It can be screwed in with a rubber tube or a magnetic sleeve if the mounting hole is deep. Do not throw the spark plug directly into the mounting hole to avoid damage to the ignition end.

5. Check whether the high-voltage terminal cap is aged or damaged. Then hand press the high voltage terminal cap vertically onto the spark plug until a click is heard. It is recommended to replace the spark plug, high voltage wire and ignition coil at the same time.

6. Tighten the spark plug to the recommended torque, or follow the installation instructions to an angle. The socket size must match the hex. The internal aperture should be large enough to avoid stressing applying too much stress to the ceramic.

Spark plugs are wearing parts and are generally not used after their lifespan expires. Some manufacturers stipulate that the spark plug can be manually adjusted after use for a period of time before use. For this case, please note that:

1. Some manufacturers stipulate that the spark plug can be manually adjusted after use for a period of time before use. For this case, please note:

2. Check the spark plug electrode for ablation and measure the gap with a feeler gauge. If the gap has exceeded the specified range, you can hold the spark plug with the ignition end vertically downward, and tap the side electrode on the table lightly.

3. Excessive force will lead to excessive deformation of the side electrodes, resulting in a small gap. At this time, the side electrode needs to be slightly broken outward with needle-nose pliers. Do not let the needle nose pliers touch the ceramic.

4. If there are serious the ceramic carbon deposits on the working end of the spark plug, the spark plug cannot be used again. It is absolutely not allowed to directly burn the ignition end of the spark plug with an open flame to remove carbon deposits, because heating with an open flame will cause cracks in the ceramics.

Flashover

Phenomenon: There are obvious arc burn marks along the axial direction on the surface of the porcelain piece.

Reasons: The spark plug has been used for a long time, the gap is too large or the ignition voltage is too high large; the aging of the high-voltage wire or the ignition coil sheath leads to poor insulation performance; the gap between the high-voltage wire or the ignition coil sheath and the porcelain part is too large.

Consequences: The spark plug does not flash normally.

Measures: Replace the high-voltage wire or ignition coil or apply silicone oil in the high-voltage wire/ignition coil; adjust the spark plug gap or replace with a the new spark plug.

Corona Discharge

Phenomenon: The insulating porcelain body close to the iron shell is discolored.

Cause: The electromagnetic field generated around the porcelain piece when the high pressure flow of ignition passes through the spark plug. Under the action of the electromagnetic field, the particles in the oil/air are adsorbed on in the ceramic, and the dirt is formed under the action of high temperature.

Effects: No harmful effects.

Measures: It is necessary to keep the spark plug installation hole clean when replacing the spark plug.

Longitudinal cracks on the large head of a porcelain piece

Phenomenon: The large end of the spark plug ceramic is cracked longitudinally.

Cause: The spark plug fell to the ground during production, transportation or installation, and the ceramic was damaged. Or the terminal is was subjected to the lateral force on the inner wall of the inclined sleeve during installation.

Effect: The spark plug does not work properly and needs to be replaced with a new one.

Transverse cracks in porcelain pieces

Phenomenon: There are transverse cracks or oblique cracks in the spark plug ceramics near the edge of the iron shell.

Reason: During the installation process, the ceramic or terminal is was subjected to the lateral external force on the inner wall of the sleeve. Usually, the inner hole of the installation sleeve is too small or the sleeve is inclined during installation.

Effect: The spark plug does not work properly and needs to be replaced with a new one.

Why choose us?

• Our team of professionals is committed to providing you with the best possible service.
• Our company is mainly engaged in the research and development and manufacturing of Spark Plug. Adhering to the development concept of 'Ensuring product quality and providing excellent service', our company has achieved good win-win results with customers, won the trust and support of customers.
• We provide custom solutions to meet your specific needs.
• We adhere to the concept of development, adhering to the purpose of achieving shareholders' value-added, corporate efficiency and employees' income, and strive to build a world class company with global competitiveness.
• We are committed to providing our clients with the highest level of professionalism and expertise.
• Our employees are loyal to customers, speak of credit, treat people with honesty, whether facing service users, or facing colleagues, speak of honesty.
• Our prices are competitive because we manufacture our products in-house.
• We adhere to the user-oriented principle and maximize the satisfaction of users' needs, thus winning their trust and loyalty.
• Our prices are competitive, without compromising on quality or service.
• We always adhere to the quality policy of providing fine Spark Plug to the society, seeking survival by quality and development by reputation.

Hot Tags: spark plug, China spark plug manufacturers, suppliers, factory, heating oil filter, remote fuel filter, rav4 hybrid battery filter, Toyota V belt, fuel filters, bmw ignition coil