Portable Digital Infrared Thermometer - MS1650
A. Introduction
This infrared thermometer is used for measuring the temperature of the object's surface, which is applicable for various hot, hazardous of hard-to-reach objects without contact safely and quickly.
This unit consist of Optics, Temperature sensor signal amplifier, processing circuit and LCD display. The optics collected the infrared energy emitted by object and focus onto the sensor. Then the sensor translates the energy into an electricity signal. This signal will be turned out to be digital shown on the LCD after the signal amplifier and processing circuit.
B,Application
C. Functions:
1. Celsius / Fahrenheit switchable
2. Equipped with a laser for aiming
3. Temperature hold
4. LCD backlight
5. 20 seconds auto power off
6. Light weight and easy operation
D. Specification
Temperature Range | 200~1650°C (392~3002°F) |
Accuracy | 200°C(392°F)~ 450°C(842°F): ±2°C or ±2% |
450°C(842°F)~ 1100°C(2012°F): ±3°C or ±3% | |
1100°C(2012°F)~ 1650°C(3002°F): ±4°C or ±3% | |
Whichever is bigger | |
Resolution | 0.1°C or 0.1°F |
Repeatability | 1% of reading or 1 °C |
Response time | 500 mSec, 95% response |
Spectral response | 900~1700 nm |
Emissivity | 0.1 to 1.00 adjustable (pre-set 0.95) |
Distance to Spot size | 50:1 |
Operating Temperature | 0°C~40°C(32°F~104°F) |
Relative Humidity | 10~80% RH non-condensing |
Storage Temperature | -20~60°C(-4°F~140°F)<85%, without battery |
Power | 9V Alkaline battery or 9V 500mA DC IN |
Typical battery life | Non-laser mode: 22 hrs; |
Laser mode: 12 hrs | |
Weight | 275.4g without battery |
Dimension | 200*155*59mm |