15 5 PH plate

The 15-5 PH alloy was designed to have greater toughness than 17-4 PH. The 15-5 PH alloy is martensitic in structure in the annealed condition and is further strengthened by a relatively low temperature heat treatment which precipitates a copper containing phase in the alloy. 15-5 PH is also referred to as XM-12 in some specifications.

Introduction:

15-5 PH stainless steel was designed to have greater toughness than 17-4 PH. The 15-5 alloy is martens tic in structure in the annealed condition and is further strengthened by a relatively low temperature heat treatment which precipitates a copper containing phase in the alloy. 15-5 is also referred to as XM-12 in some specifications. wuxi tp inox co.,ltd also offer 15-5ph UNS S15500 Grade XM-12 Round Bars. Round Bars are steel or metal bars that are produced by one or more cold finishing processes. The processes outlined below are known as Cold Finish processes or the end products are known as cold finished because there is no or very little heat applied in the entire operation of converting them from hot rolled bars (also known as black bars) to 15-5ph UNS S15500 Grade XM-12 Round Bars. 15-5ph UNS S15500 Grade XM-12 Round Bars is decaled pulled through Tungsten Carbide or High Speed Steel Die, straightened & cut-to-length; Improves dimensional tolerance and shape, straightness, surface finish, strength and machine ability. Remove bar surface of 15-5ph UNS S15500 Grade XM-12 Round Bars with revolving cutting tool, rotate bar through rolls to straighten and polish, then cut-to-length.

Related Specifications:

AMS 5659, AMS 5862, AMS 5862J Type 2
ASME SA 564, ASME SA 693, ASME SA 705
ASTM A 564, ASTM A 693, ASTM A 698, ASTM A 705
W. Nr./EN 1.4545

ASTM-A564 (XM-12), BAC 5439 Rev H Class A Type1, BMS 7-240 (Boeing)
BSS7055 Rev A
STD 2154
UNS S15500

Chemical Requirement

Note*Cb+Ta:0.15-0.45 % Fe:Balance

Mechanical Requirments: