Pore Size 0.05um MBR Membrane Elements for Sludge Treatment with PVDF material
Product Description
The MBR membrane filtration device is composed of curtain membrane module, bottom aeration and stainless steel frame. The MBR membrane module has good anti-pollution ability and strong durability. At the same time, the oxidation resistance of PVDF material is also very strong. It can be cleaned with high concentration of oxidizing property, which is more conducive to the removal of pollutants. The lining coating technology improves the application strength of the membrane wire. The MBR membrane module adopts the method of producing water at both ends, which greatly improves the pollution resistance and operation stability of the module. The MBR membrane has a permanent hydrophilic property through special hydrophilic treatment. The anti-fouling performance of the membrane wire is improved while obtaining a higher water flow rate at a lower pressure.
Products Character
1. Strong resistance to contamination The reinforced PVDF membrane filaments have ultra-smooth surface characteristics and unique charge properties, and the inner and outer walls of the membrane filaments are not easily fouled, resulting in superb anti-pollutior
2. Easy to clean. easy to recover The unique outer dense layer structure of PVDF ultrafiltration membrane makes contaminants only stay on the outer surface of the membrane and do not enter the mesh of the membrane. The membrane is easy to clean and has good flux recovery performance 3.High flux The MBR curtain module uses hydrophilic PVDF ultrafiltration membrane filaments. and the R&D team has conducted several dry experiments to improve the hydrophilicity by optimising the process parameters for controlled Product character
Item/Model | KH-MBR-25-CO-PVDF | KH-MBR-30-CO-PVDF | KH-MBR-35-CO-PVDF |
Membrane Area(M2) | 25 | 30 | 35 |
Height | 1560 mm | 1810 mm | 1810 mm |
Width | 1040 mm | 1040 mm | 1250 mm |
Thickness | 47 mm | 47mm | 35 mm |
Dry Weight | 20 kgs | 25 kgs | 30 kgs |
Membrane material | Reinforced PVDF | Reinforced PVDF | Reinforced PVDF |
Micro pore size | 0.05μm | 0.05μm | 0.05μm |
ID/OD of Membrane | 0.9/2.2mm | 0.9/2.2mm | 0.9/2.2mm |
Suspend solid | <5mg/L | <5mg/L | <5mg/L |
Temperature | 5-40℃ | 5-40℃ | 5-40℃ |
PH range | 2~11 | 2~11 | 2~11 |
Flux for waste water | 15~20 LMH | 15~20 LMH | 15~20 LMH |
Operating Method | Sucking out 8 mins and staying 2 mins | Sucking out 8 mins and staying 2 mins | Sucking out 8 mins and staying 2 mins |
Cleaning Chemicals | 500-3000ppm Sodium Hypochlorite | 500-3000ppm Sodium Hypochlorite | 500-3000ppm Sodium hypochlorite |